MULTI-ACCESS BROADBAND ROUTING SYSTEM

MAR-6000

Multiple ADSL links for higher speeds

31-day trial period

1 year warranty on parts and labour

Free software upgrades for life

Circuit Emulation Over IP

The Multi-Access Router is not only a high performance router, but also supports a wide range of optional modules, which allow customers with legacy products to remove their expensive digital circuits and to use a broadband connection and the MAR option cards to emulate those expensive digital services.

4-port HDLC over TCP

• X.25
• Stat muxes
• Frame relay products

4-port asyncronous

• Un-interruptible power supply monitoring
• Fire and burglar alarm monitoring
• Asyncronous terminals
• Modem Emulation

Multi Access Router Option Card

Emulation over IP Example

Related Information

View - CaseView MIB for MAR

High Performance Broadband Routing System

The Case Communications Multi-Access Router is a powerful, cost-effective router with the ability to support a variety of option modules, making the MAR one of the most flexible and future-proof routers available today.

Multiple DSL Trunks

Where broadband does not provide sufficient bandwidth the MAR has the ability to use multiple ADSL circuits to provide a cost effective high speed pipe between sites. The data paths may also be spread over a mix of different technologies, such as ADSL, ADSL 2Plus ISDN, N x 64Kbps etc.

Future-Proof Routing

By using a variety of optional modules the MAR can grow as a customers requirements grow. For example the MAR can start as an ADSL router and by upgrading the modules standard ADSL can change to become ADSL 2 Plus, G.SHDSL or V.SHDSL protecting the investment in the router.

ADSL Specifications

ADSL Standards

• Up to 8 Mbps download
• Up to 1 Mbps upload
• G.992.1 (G.DMT)
• G.922.2 (G. Lite)
• G.992 Annex A (ADSL over POTS)

Network Protocols

• PPP over ATM (RFC 2364 PPPoA)
• PPP over Ethernet (RFC 2516 PPPoE)
• Bridged Ethernet over ATM (RFC 1483)

SPECIFICATIONS

Hardware

• Processor: VIA C3 fanless CPU at 533 MHz or VIA C3 CPU with fan at 1.2 GHz
• Memory: 256 Mb – 1 Gb SDRAM
• 2 x option slots
• Storage: Fixed flash disk (256 Mb)
• Ethernet Port 1 x 10/100 Ethernet (533Mhz) Ethernet ports 2 x 10/100 Ethernet (1.2Ghz)
• Management port: serial console
• Serial port

Performance

• MAR 60500 – 30Mbps forwarding
• MAR 61200 – 52Mbps forwarding

Line and trunk cards

The Case Communications MAR 6000 supports the following line cards:

WAN cards

• ADSL, Bri or 56 Kbps modem cards
• G.SHDSL 4.6Mbps (under development)
• Single, dual and quad port E1/T1
• 1 & 2 port sync serial multi-interface RS 422, Rs 232 etc.
• Single port DS3/E3

Ethernet cards

• LAN cards 1 port 10/100 Ethernet
• 4 Port 10/100 Ethernet

Power supply

• AC 190 – 240 VAC power supply
• 45 watts
• Power 0.25 amps
• DC -48 VDC optional power supply
• DC 24 VDC optional power supply

Dimensions

• Height: 80mm
• Width: 325mm
• Depth: 270mm plus cables
• External PSU: 150 x 60 x 30mm

Weight

• Weight 7 lb + PSU 2 LB (3 Kg + 1 Kg)

Environmental requirements

• Operating temperature: 5 to 40 °C
• Humidity: 20% to 90% (non-condensing)
• Storage temperature: 0 to 70 °C

Software

• Routing - Rip1, Rip2, Rip3, OSPF V2/V3
• Level 2 tunneling protocol
• PPP - HDLC trunk protocol
• Firewall - IP tables
• QoS - diff service
• Port forwarding
• NAT
• VPN
• Encryption Blowfish 218, AES 128, 192, 256
• Authentification Alg Hmac-MD5, HMAC-SHA-1
• Packet filtering

Management

• Local serial port
• Remote management via SSH
• Download via SCP
• Monitoring SNMP V1, V2, V3

Ordering Information

• MAR 60500-1-ADSL – 533 Mhz 1 ADSL
• MAR 60500-2-ADSL – 533 Mhz 2 ADSL
• MAR 61200-1-ADSL – 1.2 Ghz 1 ADSL
• MAR 61200-2-ADSL – 1.2 Ghz 2 ADSL

Ordering information for transport cards:

Q-HDLC-RS232

Low cost RS 232 4 Port HDLC card

Q-HDLC-RS232/422

4 Port high performance HDLC card

4A-RS232

4 Async port card

Note: Terms and specifications are subject to change without notice.

View data sheet for Case Communications MAR 6000