Business Broadband

XLR 5000

Multi-Service Access Platform and DSLAM

DSL and Fibre Multi-Service Access Platform

Key Features

Applications

Application Examples

Mid Band Ethernet

Local Authority Network

• XLR 5000 - EFM-based Multi-Service Access Platform (MSAP)

The Case Communications XLR 5000 is a carrier class Multi-Service Access Platform that bridges the gap between legacy networks and the next generation networks providing support for both Fibre and Copper services.

Based on Ethernet.

The XLR 5000 is an Ethernet based Multi-Service Platform which allows cost effective migration from legacy PDH to next generation networking.

Support for migrating E1 / T1

The XLR 5000 provides support for conventional E1 / T1 services, allowing carriers to provide support for conventional TDM services as well as high speed Ethernet through a common platform, allowing the carrier to migrate their customers to pure IP in a cost effective manner.

Support for Copper and Fibre in a single platform

The XLR 5000 provides support for both copper and fibre in a single converged platform, with high speed 'backhaul' capabilities

DSLAM and Ethernet Demarcation Device

The XLR 5000 works with the Case Communications XLR 550 CPE series of 2-Base TL EFM DSL products as a Mini-DLSAM and can also work as a Smart Ethernet Demarcation Device, allowing carriers to provide a separation point between their WAN and their customers LAN, and provide monitoring of a customers network status.

Management

The Case Communications XLR 5000 supports IEEE 802.3ah and vendor specific standards based extended management features.

The XLR 5000 Management Interface includes comprehensive command Line Interface (CLI), a user-friendly GUI-based Web Browser Interface, SNMP and Telnet.

Mechanical and Power

• Dimension(mm):483(W) x 245(D)x 175(H)
• 4 U Height
• 19" Rack Mountable
• 6 Robust and removeable cooling fans

Power Requirements

• Dual A + B redundant power feed
• Power Input -36 - -76Vdc
• Max Power Consumption: 150 Watts

Environmental

• Operating Temperature: 0C to +50C
• Storage Temperature -40C - +85C
• Relative Humidity: Up to 95%; non-condensing.

System

• Sixteen Line Module Slots
• One control and switching module
• Two Gbps symmetric throughput per shelf.

Line Modules (Subscribers side)

• EFMC 2 / 4: 2 Base-TL Module
  -Extended G.SHDSL, G.SHDSLbis
  -EFM Bonding (EFM 802.3ah PAF)
  -Connector Type: 50 Pin Telco (rear)
  -EFMC2: 11.4Mbps over 2 pairs
  -EFMC 4: 22.8 Mbps over 4 pairs

• EFMX: Fibre optic EFM Module
  -Connector: SC Type
  -100 Base FX

• CEM Circuit Emulation Module *
  -4/2 x E1 (G.703 / G.704)
  -Timing & Synchronisation Recovery

Line Modules (Network side)

• CSM: Control and Switching Module
  -One 10/100/1000 Base T Ethernet Port Rj45
  -One 100 Base FX or 1000Base X (GigE) SFP
  

Management Interface

• Serial Interface: RS 232 (Rj45)
• Web Browser (HTTP)
• SNMP
• Telnet (Ethernet port, InBand VLAN Management)
• EFM (IEEE 802.3ah) OAM
• Proprietary RCMP (Remote Control & Management Protocol)

Front Panel Indicators

• Line Module: Link Status, Activity
• Management / Uplink card: Link, Activity, FAN Status

VLAN Support

• Port-Based & Tag based (802.1Q)
• Up to 4096 VLANS
• Double Tagging (Q-in-Q)
• Priority Remapping

QoS Support

• Rate Control
• Egress Traffic Shaping
• Classification based on port / 802.1p / DSCP
• 4 Priority Queues
• Strict Priority
• Simple WFQ

Production and Regulatory

• ISO 90001 Quality management
• ISO 140001 Environmental management
• CE Approval
• VCCI Approval

View data sheet for Case Communications XLR 5000 Cardframe

Other related products

• XLR 550A – 2Base-TL Ethernet First Mile

For additional information please contact Marketing.