INDUSTRIAL MEDIA CONVERTER
IMC-100FX-XX
IMC-100FX-XX – front view
Key benefits
- RJ-45 port support auto MDI/MDI-X function
- Auto negotiation speed, half/full duplex
- Store-and-forward switching architecture
- Built-in link lose forwarding (LLF) and link fault pass-through (LFP) technology
- Supports wide operating temperature
(-40°C – 75°C)
The Case Communications IMCW-XX-MM-DIN is a UTP to multi-mode or single fibre converter, which is designed to extend the distance of Ethernet links. The auto-MDI/MDIX avoids cabling changes and 4 dip switches adjust the forwarding mode, and the link loose forwarding (LLF) feature. The Case Industrial Media Converter can be installed onto a DIN rail or wall mounting for maximum flexibility.
- Power supply
- Wide-range redundant power design (12v to 48vdc )
- Power polarity reverse protect
- Overload current re-settable fuse present
- Case/installation
- IP-30 protection
- DIN rail and wall mount design
- Provides EFT protection 3000 VDC for power line
- Supports 6000 VDC Ethernet ESD protection
SPECIFICATIONS
Standards Compliance
Standards
- IEEE802.3 10BASE-T
- IEEE802.3u 100BASE-TX/100BASE-FX
- IEEE802.3x flow control and back pressure
Hardware
Switch architecture
- Store and forward
Fibre parameters
- SC/ST (Multi-mode): 50/125um – 62.5/125um
- SC (Single-mode): 9/125um
- Avalable distance: 2km (Multi-mode)/30km (Single-mode)
- Wavelength: 1310nm (Multi-mode/Single-mode)
Link lose forwarding
- TX → fibre: If TX port link down, the media converter will force fibre port to link down
- Fibre → TX: If fibre port link down, the media converter will force TX port to link down
DIP switches
DIP switch 1:
- OFF: Disables port/power alarm
- ON: Enables port/power alarm
DIP switch 2:
- OFF: Disables LLF (link lose forwarding) and LFP
(link fault pass-through) - ON: Enables LLF (link lose forwarding) and LFP
(link fault pass-through)
DIP switch 3:
- OFF: 100Base-FX full-mode
- ON: 100Base-FX half-mode
DIP switch 4:
- OFF: Switching mode
- ON: Media mode (100TX to 100FX)
Connectors
- Fibre: SC/ST (multi-mode, 2km), SC (single-mode, 30km) RJ-45 Socket: CAT-3/5 (10/100Mbps) Twisted pair cable auto MDI/MDI-X and auto-negotiation function support
LEDs
- Per unit: Power 1 (Green), Power 2 (Green), Fault (Red)
- TX: Link/active (Green), 100M (Yellow)
- Fiber: Link/active (Green), Full duplex/collision (Yellow)
Reserve polarity protection
PresentOverload current protection
DC 12~48V, Redundant power with polarity reverse protect function and removable terminal block VAC 18~36V.Power Consumption
2.74 Watts
Operating humidity
5%~95% (non-condensing)
Operating temperature
- Standard: -10°C ~ 60°C
- Wide Operating Temperature (-40°C ~ 75°C)
Storage temperature
-40°C ~ 85°CCase Dimension
Metal case. IP-30, 30mm (W) x 95mm (D) x 140mm (H)
Installation
DIN rail and wall mount design
EMI
FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN-61000-4-4 (EFT), CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-4-11, CE EN61000-4-12, CE EN61000-6-2, CE EN61000-6-4
Safety
UL, cUL, CE/EN60950-1, Class 1 / Division 2 Stability Testing IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
Ordering Information
| Part Number | Product Name | Description |
|---|---|---|
| 8350-025 | IMCW-100-SC-MM2 | 10/100TX to 100FX (SC, MM 2km) w/ Wide Operating Temperature (-40°C~75°C) Industrial Switch Converter |
| 8350-026 | IMCW-100-SC-SM30 | 10/100TX to 100FX (SC, SM 30km) w/ Wide Operating Temperature (-40°C~75°C) Industrial Switch Converter |
| 8350-029 | IMCW-100-ST-MM2 | 10/100TX to 100FX (ST, MM 2km) Industrial Switch Converter Wide Operating Temperature (-40°C~75°C) Industrial Switch Converter |
Note: Terms and specifications are subject to change without notice.
View data
sheet for industrial media converters