SNMP Managed Switches

FX-4000M

10/100 ports	24
Gig ports	2 x via GBIC
Expansion slots	3
Switching	Layer 2
Backplane	8.8 Gbps

Key Features

3 slots for 8 ports 10/100TX, 8 port 100FX and Gigabit uplink module
Confirms to IEEE802.3u 10BASE-T, 802.3u 100BASE-TX/FX, 802.3ab 1000BASE-T, 802.3z Gigabit fibre
High back-plane bandwidth 8.8Gbps
Stack management via one IP address, easy management by Web GUI
IGMP support for Multi Media application
Port mirror / Port security
Port bandwidth control
Supports GVRP function
Web/ SNMP / Telnet / CLI management
Port Based VLAN /802 .1Q VLAN
IEEE802.3x Flow control:
- Flow control for full duplex
- Back pressure for half duplex
IEEE 802.1p class of service
DHCP client
IEEE 802.1d Spanning tree protocol
Option Module for slot:
- 2 x Gigabit SX module
- Gigabit copper+ Gigabit SX module
- 2 x Gigabit copper module
- 8 ports 10/100TX module
- 8 ports 100FX module
IEEE 802.1x user authentication

The Case Communications FX-4000 is a high performance modular switch with 4 slots. It provides the most various combinations of the modules. The 4 slots cabinet offers up to 24 fibre or 10/100 TX ports with option Gigabit module. Various combinations of modules allow users to plan their own applications to fulfil their own needs. Advanced management features and a range of flexible option modules allows users to plan their own applications to match virtually any application.

Hardware Specifications

Standards	IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/100BASE-FX IEEE802.3z Gigabit SX/LX IEE802.3ab Gigabit 1000T IEEE802.3x Flow Control and Back pressure
Standards	IEEE802.3ad Port trunk with LACP IEEE802.1d Spanning tree protocol IEEE802.1p Class of service IEEE802.1Q VLAN Tagging
Connectors	8-port 10/100TX module: RJ-45 8-port 100FX(Multi /Single Mode) module: SC 2-port Gigabit SX/LX module: SC 2-port Gigabit 1000T module: RJ-45
Processor	ARM - 7 32 bits RISC processor
Switch MAC	VIA 6526
PHY	VIA 6108S (8-port TX module and 8-port 100FX module)
Flash ROM	512Kb x 1
Memory	3Mbits for packet buffer
MAC Addresses	8K MAC address table with Auto learning function
System Memory	8Mb x 1
Expansion Modules	• 8 port 10/100TX module with RJ-45 connector • 8 port 100Mbps multi mode fibre module with SC connector • 8 port 100Mbps single mode fibre module with SC connector • 2 port Gigabit SX module with SC connector for multi mode fibre • 2 port Gigabit LX 10KM module with SC connector for single mode fibre • 2 Gigabit copper module with RJ-45 connector • 1 Gigabit copper and 1 Gigabit SX module with RJ- 45 connector and SC connector for multi mode 50~62.5/125um fibre cable • 1 Gigabit copper and 1 Gigabit LX 10KM module with RJ-45 connector and SC connector for single mode 8~10/125um fibre cable
LEDS	System Power 8 10/100TX module: Link/Activity (Green), Full duplex (Green)8 100Base-FX module: Link (Green), Activity (Green Blinking)Gigabit fibre: Link/Activity Gigabit Copper: Link/Activity, Full duplex, 1000Mbps, 100Mbps
Power	100~240v AC, 50 /60Hz, 0.8A (maximum)
Power Consumption	60 watts (maximum)
Operate Temperature	-10º C to +60º C
Storage Temperature	-40º C to +70º C
Humidity	10%~95%RH
Ventilation	2 x DC cooling fan with auto detect function
Dimensions	440mm (W) x 280mm (D) x 44mm (H)
Safety	UL, cUL, CE/EN60950
EMI	FCC Class A, CE & UL, cUL

Software Specifications

Management	Telnet management, web management, Out band local console (RS-232)
RFCs	RFC 1157 SNMP, RFC 1213 MIB II, RFC 1643 Ethernet like, RFC 1493 Bridge MIB, RFC 1757 RMON 1, RFC 1215 Trap, RFC 2674 VLAN MIB, private MIB
SNMP Traps	Cold start, warm start, link down, link up, authorisation fail, fan fail trap. Trap station up to 3
Software Upgrades	TFTP and Console firmware upgradable
Port Trunks	Support IEEE802.3ad with LACP function and provide 7-trunk group of 4 member ports within 26 ports
Spanning Tree	IEEE802.1d spanning Tree
VLAN	Port based VLANIEEE802.1Q Tag VLANIEEE802.1v Protocol VLAN (IP, IPX) Static VLAN groups up to 256, Dynamic VLAN group up to 2048, VLAN ID from 0 to 4094
QoS Policy	Supports 8 priority levels ID for two priority queue
Class of Service	Per port 2 queues, High/ low queue. Service rule: first come first service; all High before Low, WRR for High or low weight
Port-based Priority	Support 3 settings: Disable, Low and High priority. When set to Disable, the income packet will follow QoS policy; Otherwise, the packet will follow port priority setting to High/Low queue
IGMP	IGMP V1 and V2 snooping.IGMP Snooping for multimedia application, IGMP group supports 256 groups
Port Security	MAC address filter for ingress and egress packetStatic MAC address lock for source address
Port Mirroring	The Global system supports 3 mirroring types: RX, TX and Both packet. The maximum of port mirror entries is up to 25
Bandwidth Control	Per port support Bandwidth control. Per level 100K
Stacking (Future)	The FX-4000M provides stacking and via master switch interface can manage and stack up to 8 units
DHCP	DHCP client
802.1x Authentication	1. Support IEEE802.1x User-Authentication and can report to RADIUS server. => Reject => Accept=> Authorise=> Disable 2. Support TACACS+
Packet Filter	Broadcast storm

Ordering Information

Part Number	Model Name	Description
8220-500	FX-4000M	4 slot intelligent chassis switch
8240-140	2 Gigabit copper module	2 Gigabit Copper Module for FE24E1G & FX-4000series
8240-143	1 1000T and 1GBIC module	1 Gigabit Copper & 1 GBIC (3.3V) module for 24E1G&FX-4000 series
8240-156	2 Mini GBIC	3.3V Mini GBIC module for 24E1G & FX-4000 series
8220-510	8 x 100TX module	8 port 10/100TX module for FX-4000
8220-520	8 x 100FX(MM/SC) module	8 port 100FX multi-mode for FX-4000
8220-530	8 x 100FX(SM/SC30) module	8 port 100FX single-mode 30km for FX-4000

View data sheet for the FX-4000M

For more information on our range of Ethernet Switches, please contact Marketing.

Product Portfolio > SNMP Managed Switches > This page

Top

Last updated: 01 November 2006