Industrial Ethernet Switch

 

IGS 2206C

6 x 10/100/1000TX

+ 2 x Gigabit Fibre via Mini GBIC Combo

X-Ring Support

Managed Industrial Switch

 

10/100/1000TX ports
6
Gigabit ports
2 Via Mini-GBIC
Fibre Ports
2 via Mini-GBIC
Switching
Layer 2
Backplane / PPS
16Gbps / 23.8Mpps
X-Ring Support
Up to 20 switches
Alarm output
Relay Port
Installation
DIN rail or wall mount

 

 

Case Communications Industrial Switches are designed with three unique hardware features:

1. They are capable of using AC power adapters


2. Terminal block is placed on the bottom of the switch to isolate dust and be waterproof


3. Power Supplies Auto detect with DC12V to 48V.

Case Communications Industrial Switches are designed to work in critical network environment with IP 30 enclosure and tested to extensive Industrial EMI and Safety standards.
Each Case Communications Switch has passed the stringent 1.2KVA Hi-Pot abnormality test.

X-Ring Technology
The IGS 2206C uses the patent-pending "X-Ring" feature that provides an auto-recovery-path within 300ms when the primary network path has failed. The ring can be established with up to twenty (20) Industrial Switches. The Dual-Homing feature can ensure two X-Ring groups with redundant back up when connected to a backbone switch. The switches can set to 'Back-up Masters' in a X-Ring to ensure the most secure network.

See X-Ring application examples

Mini GBIC
Mini GBIC slots allow the connection of 100 / 1000M Fibre SFP transceivers.

Relay Alarm system
A relay alarm system immediately notifies of power failure / and or port down events.

Events are sent to a pre-define e-mail address

Key Features

  • System Interface/Performance
    RJ-45 port support Auto MDI/MDI-X Function
    Store-and-Forward Switching Architecture
    Back-plane (Switching Fabric): 16 Gbps
    1Mbits Packet Buffer
    8K MAC Address Table

 

  • Case/Installation
    IP-31 Protection
    DIN Rail and Wall Mount Design


  • Power Supply
    Input Power Isolation design for Telcom application, Pass Hi-Pot test~1.5KV
    Wide-range Redundant Power Design
    Power Polarity Reverse Protect

 

  • Spanning Tree
    Supports IEEE802.1d Spanning Tree
    Supports IEEE802.1w Rapid Spanning Tree

  • VLAN
    Port Based VLAN
    Supports 802.1 Q Tag VLAN
    GVRP
    Double Tag VLAN
    Private VLAN

 

  • X-ring - Click to see examples
    X-ring, Dual Homing, and Couple Ring Topology
    Provides redundant backup feature and the recovery time below 300ms

 

  • Port Trunk with LACP

 

  • Supports 802.1ab LLDP

 

  • QoS (Quality of Service)
    Supports IEEE 802.1p Class of Service,
    Per port provides 4 priority queues
    Port Base, Tag Based and Type of Service Priority

 

  • Bandwidth Control
    Ingress Packet Filter and Egress Rate Limit
    Broadcast/Multicast Packet Filter Control

 

  • Port Mirror:
    Monitor traffic in switched networks.
    TX Packet only
    RX Packet only
    Both of TX and RX Packet


 

  • System Event Log
    System Log Server/Client
    SMTP e-mail Alert
    Relay Alarm Output System Events


  • Security
    Port Sercurity: MAC address entries/filter
    IP Security: IP address security management to prevent unauthorized intruder.
    Login Security:IEEE802.1X/RADIUS


  • SNMP Trap
    Device cold start
    Power status
    Authentication failure
    X-Ring topology changed
    Port Link up/Link down

 

  • IGMP
    With Query mode for Multi Media Application

 

  • Configuration downloads and uploads
    TFTP Firmware Update and System Configure Restore and Backup

 

 


Hardware Specifications

Standards IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit fibre
IEEE802.3x Flow Control and Back Pressure IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning Tree/ IEEE802.1w Rapid Spanning Tree
Standards IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
IEEE 802.1x User Authentication (Radius)
IEEE802.1ab LLDP

RFC

Standards

RFC2030 SNTP, RFC 2821 SMTP, RFC 1215 Trap, RFC2233 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC 2665 Ethernet like MIB, RFC 2819 RMON MIB, Private MIB
Switch Architecture

Back-plane (Switching Fabric): 16Gbps
Packet throughput ability (Full-Duplex):23.8Mpps @64bytes

Transfer Rate 14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Fiber Ethernet port
Packet Buffer 1Mbits
Mac Address 8K MAC address table
Flash ROM 4Mbytes
DRAM 32Mbytes
Connectors 10/100TX: 8 x ports RJ-45 with Auto MDI/MDI-X function
Gigabit fibre: 2 x Mini-GBIC socket.
RS-232 connector: RJ-45 type
Optical Cable LC(Multi-mode): 50/125um~62.5/125um
LC(Single mode): 9/125um~10/125um
Available distance: 2KM (Multi-mode) / 30KM (single-mode)
Wavelength: 1310nm (multi-mode/ single mode)
Protocol CSMA/CD
LEDS Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Yellow), Master (Green)
Per port: Link/Activity (Green), speed ( 1000 Green)
Mini GBIC: Link/Activity (Green)
Power Supply Input Power Isolation design for Telcom application, Pass Hi-Pot test~1.5KV
DC 24 ~48V, Redundant power with polarity reverse protect function and connective removable terminal block for master and slave power

Case Dimension

IP-30, 72mm (W) x 105mm (D) x 152mm (H)
Operating Humidity 5% to 95% (Non-condensing)
Operating Temperature -25 ~ 60°C
Storage Temperature -40 ~ 85°C
Number of Fans Nil (0) Fanless Operation
Installation Provide DIN rail kit and wall mount ear for wall mount or DIN-type cabinet install
EMI FCC Class A, CE EN6100-4-2, CE EN6100-4-3, CE EN-6100-4-4,
Safety UL, cUL, CE/EN60950-1
Stability Testing IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)

 

Software Specifications

Management SNMP v1 v2c, v3/ Web/Telnet/CLI/Menu Driven Management
VLAN Port Based VLAN IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.)GVRP (256 Groups)Double Tag VLANPrivate VLAN
Port Trunk with LACP
LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members
LLDP Supports LLDP to allow switch to advise its identification and capability on the LAN
Spanning Tree Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree
X-Ring Supports X-Ring, Dual Homing, and Couple Ring
Provides redundant backup feature and the recovery time below 300ms
Quality of Service The quality of service determined by port, Tag and IPv4 Type of service, IPv4/ IPv6Different Service
Class of Service Supports IEEE802.1p class of service, per port provides 4 priority queues
Supports 100 entries of MAC address for static MAC and another 100 for MAC filter
Port Security
Port Mirror Supports 3 mirroring types: "RX, TX and Both packet".
IGMP Supports IGMP snooping v1,v2
256 multicast groups and IGMP query
IP Security Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.
Bandwidth Control Supports ingress packet filter and egress packet limit
The egress rate control supports all of packet type and the limit rates are 100K~250Mbps
Bandwidth Control Ingress filter packet type combination rules are Broadcast/Multicast/Unknown Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be set from 100k to 250Mbps
Flow Control Supports Flow Control for Full-duplex and Back Pressure for Half-duplex
System Log Supports System log record and remote system log server
SMTP Supports SMTP Server and 6 e-mail accounts for receiving event alert
Relay Alarm
Provides one relay output for port breakdown, power fail and alarm
Alarm Relay current carry ability: 1A @ DC24V
SNMP Traps Up to 3 Trap stations
Cold start, Port link up, Port link down, Authentication Failure, Private Trap for power status, Port Alarm configuration, Fault alarm, X-Ring topology change
DHCP Provides DHCP Client/ DHCP Server/ IP Relay functions
DNS Provides DNS client feature and supports Primary and Secondary DNS server.
SNTP Supports SNTP to synchronize system clock in Internet
Firmware Update Supports TFTP firmware update, TFTP backup and restore.
Configuration upload and download Supports text format configuration file for system quick installation

 

Ordering Information

Part Number
Model Name
Description
8350-605
IGS-2206C
6 10/100/1000T + 2 10/100/1000T/Mini-GBIC Combo w/X-ring Managed Industrial Switch

 

View Data sheet for the IGS 2206C

For more information on our range of Industrial Ethernet Switches, please contact Marketing.

Product Portfolio > Industrial SNMP Managed Switches > This page  
 Top Copyright © Case Communications 2007

Last updated: 28 May 2007