Home | Products | Services | Case Studies | Technical Information | Press Room

 

SNMP Managed Switches

Max Switch II

10/100 ports 32
Gig ports 4 x via GBIC
Fibre Ports 32
Expansion slots 4
Switching Layer 2
Backplane 10.4 Gbps

 

Key Features

  • Modular 4 Slots Chassis
  • Switch fabric up to 10.4 Gbps
  • Max 32 100FX/100TX ports
  • Fully management
  • IGMP support for multimedia application
  • Port Mirror
  • 8 10/100TX, Gigabit Copper/Fibre, 2/4/8 100FX module supports
  • Port Based VLAN /802 .1Q VLAN
  • Class Of Service / Port Trunk
  • Broadcast Storm Filter
  • Type of Service for Quality of Service
  • Port Security
  • Spanning Tree
  • SNMP Trap
  

The Case Communications Max Switch II is a high performance modular Ethernet switch with 4 expansion slots. The Max Switch II is unique in its modularity and its 4 slots offer the ability to support up to 32 Fibre or Copper ports, or up to 4 Gigabit ports. Advanced management features and a range of flexible option modules allows users to plan their own applications to match virtually any application.

Hardware Specifications

Standards IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3z Gigabit SX/LX
IEE802.3ab Gigabit 1000T
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Link Aggregation
IEEE802.1d Spanning Tree Protocol
Standards IEEE 802.1p Priority support
IEEE 802.3ac frame extension for VLAN tagging
IEEE 802.1D (Bridging), 1993
IEEE 802.1Q (Virtual LAN) 1998
Protocol CSMA/CD
Connectors 8 ports 10/100TX module: RJ-45
2/4 ports 100FX(Multi Mode) module: SC
2/4 ports 100FX(Single Mode) module: SC
8 ports 100FX(multi mode) module: MT-RJ
1 port Gigabit SX/LX module: SC
1 port Gigabit 1000T module: RJ-45
Architecture Store and Forward
Backplane Bandwidth 10.4 Gbps
Data Buffer 256K bytes for 8 ports TX module
5M bytes for 2/4/8 ports 100Mbps FibreModule
128K bytes for Gigabit Module
Forwarding Rate 14880 Packets per second for 10Mbps
148800 Packets per second for 100Mbps
1488000 Packets per second for 1000Mbps
Network Cables UTP/STP Cable: 100 metres
Multi-mode Fibre (50/125, 62.5/125um): 2 km
Single-mode Fibre (8/125,10/125um): 60 km
Multi-mode Fibre (50/125um): 500Meters (Gigabit SX)
Single-mode Fibre (8/125,10/125um): 10KM (Gigabit LX)
MAC Addresses Auto Learning. 4K for 8 10/100TX and Gigabit module;12K for 2/4/8 100FX module
LEDS System Power, Diagnostic
8 ports TX module: 100Mbps,Link/Active, Full-duplex/Collision
2/4/8 ports Fibre module: Link/Active, Full-duplex/Collision
Gigabit Module: Link, Active, Full-duplex, Collision
Dimensions 440 X 227 X 66mm
Weight 3.6kg
Power 100~240v AC 50/60Hz
Operate Temperature 0 ~ 45° degrees C
Storage Temperature -20 ~ 70° degrees C
Humidity 10% to 90% (Non-condensing)
EMI and Safety FCC Class A, CE & UL,cUL

 

Software Specifications

Management Telnet Management, Java Based Management, In Band Local Console (RS-232)
MIBS RFC1157 SNMP, RFC 1213 (MIB II), RFC 1215 Trap (Link Down/Up, Cold/Warm Start, authorization Fail), RFC1493 (Bridge MIB), RFC 2674 (VLAN MIB), Lantech Enterprise MIB
Software Upgrades TFTP firmware upgrade
Port Trunks IEEE 802.3ad Trunk with LACP for load distribution control and fail over recover, member up to 4 port per group, trunk up to 4 Groups
Spanning Tree IEEE 802.1d Allows resilient network path to take over automatically when the preferred network path has Failed
VLAN Up to 4 K VLAN ID and for 802.1Q VLAN and Port Based VLAN
QOS Policy Ipv4 type of service, 8 levels for priority queue of Class of Service
Class of Service IEEE802.1p Each port supports Hi/Low priority queue
Security MAC address number limited, Static MAC address lock for source address lock for source address.
Port Mirroring Port Mirror is to mirror traffic (all frames) from a specific resource port to a target port. This help tracking down network errors or erroneous packet transfers without interrupting the flow of data across the network.
IP Multicast IGMP Snooping for multimedia application
DHCP DHCP client.
User Authentication This security function will prevented unauthorised IP address login, it supports four accounts for management security

 

Ordering Information

Part Number Model Name Description
8220-300 Max Switch II M 4 Expansion Slots (10/100/1000Mbps) Switch Cabinet, Intelligent
8220-311 8 Ports 100TX Module 8 Ports (10/100TX) Module, Intelligent
8220-321D
4 Ports 100FX (SC/2km) Module 4 Ports (100FX, SC, Multi-Mode, 2km) Module, Intelligent
8220-323 4 Ports 100FX (SC/60km) Module 4 Ports (100FX, SC, Single-Mode, 60km) Module, Intelligent
8220-362 1 Port 1000T Module 1 Port (10/100/1000T) Module, Intelligent
8220-360 1 Port 1000SX (SC/0.5km) Module 1 Port (1000SX, SC, Multi-Mode, 0.5km) Module, Intelligent
8220-364

1 Port 1000LX (SC/10km) Module 1 Port (1000LX, SC, Single-Mode, 10km) Module, Intelligent

 

View data sheet for the Max Switch II

For more information on our range of Ethernet Switches, please contact Marketing.

 

  
Product Portfolio > SNMP Managed Switches > This page  
 Top Copyright © Case Communications 2006

Last updated: 01 November 2006