R1™ Desktop

31-day performance guarantee

1 year warranty on parts and labour

Free 24/7 support for 1 year

Free software upgrades for life

Use: Branch office or small application router

O/S: Enterprise Linux operating system

Physical Desktop: 102mm x 333mm x 386mm

Capacity: Wire Speed up to 8Mbps

Configuration: Menu-driven router set up

Routing: RIP1, RIP2, OSPF

Data Link: PPP, HDLC, frame relay & ATM

Management: SNMP monitoring

Replacement Guide

Cisco 1600 series
Cisco 1700 series
Cisco 2500 series
Cisco 2600 series

The R1™ is a modular Industrial Series router supplied by Case Communications. The R1 provides standard features including IP firewall, interface bonder, bridging, QoS, VPN, RIP and OSPF. Its extensive feature set make the R1 an ideal solution for a wide range of TCP/IP routing applications.

The R1 provides two expansion slots in a compact steel chassis that includes a high-performance processor, error-correcting memory, 10/100 ethernet port, and flash storage with no moving parts. The R1 provides best-in-class flexibility for varied installation environments including support for set-top, wallmount, and rackmount installation. It is also available in a ruggedized version that can operate under extended temperature conditions from –5° to 70° C.

The expansion slots include two full-height slots.

The full-height slot accepts all Industrial Series network cards including PCI 520 series cards with one, two or four T1, E1, or synchronous serial ports.

Using these add-on network cards, the R1 can route multiple IP networks using fractional and full T1 or E1, 56/64K DDS, basic rate ISDN (BRI), ADSL, 802.11a/b/g wireless, ethernet, and 56K dial-up modem connections. In addition, the CPU upgrade for the R1 provides the processing power required to route DS3/E3 circuits at wire speed.

The R1 provides support for NAT firewall security, IPsec and SSL VPNs, quality of service (QoS), VLAN tagging, VRRP for LAN failover, dynamic routing, packet filtering, bridging, peer-to-peer traffic control, and more. The Linux also includes the ImageStream Inetics platform, which provides a tightly integrated Linux kernel, management software, and the Inetics Driver Component Architecture (IDCA). IDCA supports WAN protocols including PPP, Cisco HDLC, frame relay, ATM, and SoftCell™ ATM. Inetics also makes it easy to troubleshoot LAN and WAN connections by providing real-time port status and performance monitoring.

The R1 offers wire-speed performance and unwavering reliability in a small package. The R1 can replace Cisco 1600, 1700, 2600 and 3620 routers, and it makes an ideal solution for virtual private network (VPN) and quality of service (QoS) applications where wire-speed performance is required.

SPECIFICATIONS

Hardware

• Processor: Via C3
• Memory: 128 Mb SDRAM
• Storage: Fixed flash disk
• Network port: 10/100 Ethernet
• Management port: Serial console

Expansion interface

• Two full-height 32-bit 33 MHz PCI slot

Wire-speed performance

• Up to four T1s or E1s

Power supply

• Design: PFC auto-ranging
• AC mains voltage: 85 to 265 VAC
• AC mains frequency: 47 to 63 Hz
• Power output: 70 W

Dimensions

• Height: 8 inches (20.3 cm)
• Width: 3.48 inches (8.84 cm)
• Depth: 10 inches (25.4 cm)

Weight

• 8 lbs. (3.6 kg)

Environmental requirements

• Operating temperature: 0 to 55 °C
• Storage temperature: 0 to 70 °C
• Humidity: 0% to 95% (non-condensing)

• Operating temperature: –5 to 65 °C
• Storage temperature: 0 to 70 °C
• Humidity: 0% to 95% (non-condensing)

Software

• Enterprise Linux™
• Linux kernel
• SAND architecture
• Menu-driven configuration
• PPP, HDLC, frame relay & ATM
• ATM inverse multiplexing (IMA)
• RIP1, RIP2, OSPF, IS-IS & BGP4
• Automated upgrades
• Real-time monitoring
• SNMP or NetFlow® accounting
• IP firewall
• Bandwidth limiting
• Packet filtering
• Port forwarding
• Quality of Service (QoS)
• Interface bonder
• Concurrent bridging & routing
• GRE & CIPE tunneling
• Secure telnet (ssh) v.2
• System scheduler
• IPSec VPN
• VRRP
• VLAN tagging
• 1:1 & 1:many NAT
• IPv6

Options

CPU Upgrade

• CPU Upgrade for DS3 / E3 performance

LAN cards

• 1 port 10/100 ethernet

WAN cards

• 1, 2, and 4 port sync serial
• 1, 2, and 4 port T1 or E1
• 1-Port 802.11a/b/g wireless
• 1-port ADSL
• 1-portbasic rate ISDN (Bri)
• 1-Port 56K modem

Model numbers

• R1-1000 – Standard AC chassis
• R1-1000DC – Extended Temperature with DC power
• R1-1000DS3-R1 with CPU Upgrade

Note: Terms and specifications are subject to change without notice.

View data sheet for R1 Desktop router

For more information on our range of networking products, please contact Marketing