 |
InfiLINK WiMax 300
40Mbps to 300Mbps with ranges to 60km
|
|
InfiLINK WiMax products from Case Communications offer a wide range
of licensed and unlicensed frequency band and software-upgradable
capacity options, in modular, single and dual-radio split system
design, connectorized or with integrated antennas, for a broad array
of applications including:
- WISP infrastructure, matching today's capacity of remote base
station
- Enterprise or campus, building-to-building connectivity
at FastEthernet speeds
- Redundant Cellular backhaul, multiple E1/T1 TDM and Ethernet/IP
transport
- Cost-effective alternative for legacy microwave links
- Long-range backhauls reaching distances of more than 60km
- NLOS backhauls using lower frequency band
- Reliable backup for high-speed FSO and millimeter-wave
links or fibre lines
|
|
Key Features and Highlights
| Available in multiple frequency bands including 2.2-2.3, 2.4, 4.9, 5.1-5.3, 5.4 and 5.8GHz |
- Several region-specific output power versions available,
software adjustable
- Dynamic Frequency Selection to use the least occupied
channels at unlicensed bands
- Radar Detection and avoidance to match FCC/CE regulations
|
| High capacity and spectrum efficiency – up to 300Mbps, equivalent to STM-1 |
- Software-upgradable, capacity options from 40 to 300Mbps
to lower startup costs
- 5/10/20/40MHz selectable channel size to maintain cost-effective
spectrum usage and reduce interference
- Flexible bandwidth allocation – symmetric or fully asymmetric,
fixed or dynamically adjusted
- Adaptive modulation to ensure error-free operation –
link conditions are constantly monitored in both direction
|
| Long range |
- Can operate at further distances than conventional single-radio
links
- Multiple radios allow to use less power and antenna size
to reach remote site,
reducing roll-out cost
|
| Best-in-industry set of networking features |
- Intelligent Layer 2 switch
- Integrated router to reduce network overhead
- QoS enforcer
|
| Secure, reliable wireless communication even in challenging environments |
- Minimized downtime during extra fade periods by using
diverse, physically separated antennas – up to 4 separate signal paths
- Always-on mutual authentication between link ends based
on digital signatures and keys rather than MAC addresses
- Out-of-band and in-band, secure, password-protected management
interface, GUI and SNMP
- "1+1 Hot-Standby" - link seamlessly switches
to the second set of equipment in case of hardware failure*
- Small-footprint antenna, robust outdoor unit design ensuring
long-term operation all-weather operation
|
| Modular, scalable architecture |
- Separate indoor and outdoor units, Ethernet only or Ethernet
with nxE1/T1 ports
- Integrated or external detachable antennas at the outdoor
unit
- Easy-to-deploy mounting hardware and form-factor
- Seamless integration into the existing SkyMAN network
- Automatic and manual, fault-proof over-the-air firmware
upgrade
|
Technical Data Sheet
| Radio interface options: |
Modulation types: OFDM with BPSK, QPSK, QAM16,
QAM64 |
| Channel widths supported: 40MHz, 20MHz, 10MHz,
5MHz |
Maximal net throughput: up to 300Mbps
(2 x 20MHz channels, non-compressible data) |
| Operating frequencies: |
2.4GHz radio 5-6GHz radio |
- 2.270GHz – 2.412GHz
- 2.412GHz – 2.482GHz
- 4.950GHz – 4.990GHz
- 5.150GHz – 5.250GHz
- 5.250GHz – 5.350GHz
- 5.470GHz – 5.725GHz
- 5.725GHz – 5.845GHz
- 5.865GHz – 5.920GHz |
| Output power: |
Up to 200mW (23dBm) up to 500mW (27dBm), high-power
modification
Up to 63mW (18dBm), regular-power modification
1W EIRP, European version
|
| Sensitivity: |
-73dBm ... -91dBm
-71dBm ... -94dBm
|
| Typical link distance: |
60+ km (with external high-gain antennas and high-power
models, LOS)
60+ km (external high-gain antennas and high-power models, LOS)
30+ km (integrated flat panel antennas and high-power models, LOS)
|
|
Product Summary
|
|
| Radio interface connection |
2xN-type female or internally connected antenna |
| Radio interface features |
Integrated Flat Panel Antenna (4.920GHz – 6.060GHz only) |
| Antenna parameters |
23dBi gain |
| Dual linear polarization |
| Radiation pattern width: 9 degrees vertical, 9 degrees horizontal |
| F/B ratio: 30dB (min) |
| Wired interfaces |
Wired network connection:
1 x or 2 x Ethernet 10/100BaseT (RJ-45) |
Wired network interface: IEEE 802.3
CSMA/CD, Ethernet Blue Book |
Serial interface:
RS-232 System Console Port |
| E1/T1 interfaces (optional) |
Framing: Framed / Unframed (transparent) |
| Number of E1 ports: 2, 3, 4 |
| Standard Compliance ITU-T G.703, G.704, G.823 |
| Line Code E1: HDB3 @2.048Mbps |
| Line Code T1: B8ZS @1.544Mbps |
| Latency: 8msec (typical) |
| Connector: RJ-45 |
| Jitter/Wander Compliance: G.823, G.824 |
| Accurate TDM clock recovery |
| Loopback, internal, external and adaptive timing |
| Separate CAS data channel |
| DM data is strictly prioritized over Ethernet traffic |
| MAC layer features |
ARP filter/proxy |
| MAC/IP filtering |
| Full-fledged 2nd layer switch |
Intelligent Layer 2 switch
- 802.1q VLAN support, transparent, or frame tagging and
re-tagging
- multiple trunk groups
- automatic storm/flood/bridge loop protection
|
Pseudo-radio interface
(Backhauls connected via wired interfaces can be kept in the same management domain) |
|
|
| Networking features |
RIPv2/OSPFv2/static routing |
| Tunnelling (Ethernet over IP capable) |
| IP-Firewall |
| NAT (multipool, H.323-aware) |
| DHCP client/server/relay |
|
QoS enforcer supports frame/packet
classification and traffic limiting based on:
- IP ToS / DSCP / 802.1p tags
- VLAN/IP/MAC address and protocol/port combinations
- RTP voice and TDM payload
|
| Security features |
Mutual key-based authentication |
| Storm / flood protection |
| Password protection |
| Protocol messages encryption |
| Over-the-air payload encryption (optional) |
| Management features |
SNMPv1/SNMPv3 support MIB II, private MIB) |
| Configurable SNMP Traps |
| 16 QoS priorities mapping (without third-party routers) |
| Telnet |
| Windows-based GUI configuration and monitoring tool |
| Remote Shell |
| Power |
Up to 20 Watts (with IDU-5000-CPE/IDU-
5000-RJ for SkyMAN 0302.2 and SkyMAN
0102.1) |
Up to 30 Watts (with IDU-5000-SCR for
SkyMAN 0102.3 and SkyMAN 0302.3) |
Up to 40 Watts (with IDU-5000-E1SCR for
SkyMAN 0102.3 and SkyMAN 0302.3) |
| Consumption: 110-240 VAC @ 50/60Hz |
| Environmental |
Outdoor Units: -40..+60C, 100% humidity,
condensing (exceeds IP65 rating) |
| Indoor Unit: 0..+40C, 95% humidity, non-condensing |
Other related products
For additional information please contact Marketing.
|
| Product
Portfolio >Wireless
>WiMax >This page |
 Top |
Copyright © Case Communications 2008 |
 |
|
