450i Point to point and point to multi-point wireless

Inflink Antenna

Point to point and point to multi-point wireless overview 

The 450i Point to point and point to multi-point wireless system  from Case Communications is a very well field proven family of products designed for various applications including fixed wireless access infrastructure for operator and enterprise networks as well as select nomadic and mobile scenarios.

Applications

  • Triple-play wireless ISP networks
  • Video surveillance, traffic management and public safety wireless infrastructure
  • Fixed, nomadic and mobile connectivity solution for SCADA systems
  • Long-range rural connectivity
  • Government and municipal network

Case Communications Point to point and point to multi-point wireless key features and highlights

  • 300 Mbps Maximum Base Station sector capacity
  • Ultra-Wide band Radios 3Ghz or 5Ghz
  • 2 x 2 OFDM MIMO Radio Capable of up to 300Mbps per sector
  • Advanced radios design improves transmit power and increases receiver  sensitivity
  • Rugged Metal Enclosure – designed to meet IP-66 and IP-67 standards and to withstand harsh environments.
  • Optional ATEX / HAZLOC certified models
  • Dynamic Interference Filtering for improved performance
  • Flexible frequency planning and powerful interference mitigation tools
  • Advanced Quality of Service Tools.

Security

  • Encryption: FIPS-197 128bit AES, 256-Bit AES (Requires Optional Licence)

Best-in-breed solution for long-range rural connectivity

  • High gain integrated base station sectors and subscriber terminals boost sector coverage up to 40 miles, 64 km
  • All-integrated solution in combination with installation and field diagnostics tools available facilitate rapid deployment and reduce installation costs
  • Robust and durable design featuring IP66 / IP67 water and dust protection as well as built-in lightning protection help reducing total cost of ownership (TCO) and meet service level agreement (SLA) requirements of the most demanding customers

Network Management

  • Multiple management interfaces including IPv4 / IPv6 (dual Stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and SNMP3
  • The 2×2 systems can easily be integrated into a 3rd party NMS such as CaseView

Spectrum  
Channel Spacing3Ghz; Customisable to 50Khz5Ghz Configurable in 2.5Mhz Increments
Frequency3Ghz: 3300 - 3900Mhz5Ghz: 4900 - 5925Mhz
Channel Width5Mhz, 7Mhz, 10Mhz, 15Mhz, 20Mhz, 30Mhz, or 40Mhz5Mhz, 10Mhz, 15Mhz, 20Mhz, 30Mhz or 40Mhz

Interface Specifications 
Physical Layer2 x 2 MIMO OFDM
Ethernet Interface100 / 1000Base-T, full duplex, rate auto negotiated (802.3 compliant)
Protocols UsedIPv4, IPv6, UDP, TCP/IP, ICMP, Telnet, SNMP, HTTP, HTTPS,FTP
Network ManagementIPv4 / IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and V3
MTU1700 bytes
VLAN802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority, dynamic port VID

Performance  
Modulation Levels (Adaptive)MCASignal to Noise required (SNR in dB)
2xQPSK10
4x16QAM17
6x64QAM24
8x256QAM32
Maximum Deployment rangeUp to 200 Kilometres (124 miles) depending on configuration
Latency3 ~ 5ms typical
GPS SynchronisationYes via Autosync (UGPS, CMM4 or CMM5)
Quality of ServiceDiffserve QoS

Physical Features 
Antenna Connection50Ohm, N-Type (Connectorised version only)
Surge Suppression (LPU Fitted)EN61000-4-5: 12us/50us, 500V voltage waveform. Recommend external surge suppressor.
Mean Time Between Failure>40 years
Dust and WaterIP67, IP66
Temperature / Humidity-40C to +75C (-40F to 167F) 0-100% condensing
WeightApprox. 2.5Kg (5.5lbs)
Wind Survival322 Km/h (200mph)
VibrationNEMA TS2 Section 2.1.9 and Section 2.2.3
ShockNEMA TS2 Section 2.1.10 and Section 2.2.4
External IcingNEMA 250-2003 Section 5.6
Dimensions (H x W x D)31.0 x 31.0 x 6.4cm (12" x 12" x 2.5")
Power Consumption15W Typical, 18W max.
Input Voltage48~59vdc, 802.3at compliant
InstallationWall or Pole Mount

Link Budget 
Antenna Beam Width10 degree azimuth for integrated antenna
Antenna Gain3Ghz integrated +19dBi dual pol, H+V
Transmit Power Range40dB dynamic range (EIRP limit by region( (1dB steps)
Maximum Transmit Power+27dBm combined output (+25dBm combined for 3Ghz)
VSWR1.5 Reflection Coefficient 0.2. Reflected Power 4%, return Loss 14dB
Power ControlATPC (Automatic Transmit Power Control) at system level, Backhaul slave implements ATPC (Future software release)

450i Datasheet (14 downloads)

Please Contact Case Communications for 450i Point to point and point to multi-point wireless ordering Information

For more information please contact Case Communications.