

Overview
The XG from Case Communications is the most recent addition to our wireless portfolio. It is a record-breaking and innovative Point-to-Point solution in the sub-7 GHz frequency band. Its a 500Mbps WiMAX Wireless system, boasting the best-in-breed spectral efficiency, higher-than-ever-before processing power and distance vs performance ratio. Reaching a peak of 500 Mbps of net throughput in 40 MHz of spectrum and more than 130 Mbps in only 10 MHz, it is the highest performing Point-to-Point system available in the marketplace today.
Available with a wide range of integrated antennae, as well as a connectorised version for use with 3rd party external antennae, and coupled with improved transmit power and sensitivity, the XG family will fit perfectly into a large array of applications such as backhaul in the telecom market, education, oil and gas, smart cities, video surveillance and public safety. It was designed by InfiNet to meet the exact requirements of the most demanding customers, most complex projects and most challenging environments
Frequency Bands
- 4.9 — 6.0 GHz
- 6.0 — 6.425 GHz
Applications
- High capacity short-, medium- and haul for mobile operators and service providers
- Full-fledged fibre/FSO/mm-wave systems replacement, extension or backup
- LOS and NLOS macro- and small-cell LTE backhaul
- Connecting clusters of CCTV cameras to the monitoring centres
- Rapid deployment of network infrastructure
Key Features and Highlights
- Extensive interference mitigation and NLOS (Near Line of Site ) toolkit
- Well-balanced selection of integrated and external antenna models
- Aesthetical design
- TDD sync using GPS receiver or IEEE1588
- Consistent latency below 1 ms
- Maximal throughput decline as low as 7% at 100 km distance
Highest spectral efficiency
- Best-in-class 13 bps/Hz
- In excess of 100 Mbps net throughput in only 10 MHz channel width
- Highest order QAM256 and QAM1024 modulations
Superior performance and processing power
- Unmatched 1+ million packets-per-second processing power
- Full capacity at any packets sizes and for any type of traffic
- Real throughput up to 240 Mbps in 20 MHz channel and up to 500 Mbps in 40 MHz
Longest Reach
- Distances in excess of 30 km with integrated antennas and more than 100 km with external high gain antennas
- High-power transmitter and improved sensitivity even at highest modulations, ensuring maximal link budget
- Unprecedented system gain of 177 dB even with integrated antennas
Seamless integration
- Extended QoS support
- Two RJ-45 Gigabit Ethernet ports and SFP port
- Support of IEEE1588v2
- Full-fledged L2 switching with VLAN and Spanning Tree protocols supported
Fully rugged design well-suited for rapid deployment
- Operating temperature range –40..+60º С
- IP66/IP67 compliant water and dust protection
- Aluminum cast enclosure
- Built-in lightning protection
- Universal mounting kit
- Easy-to-use waterproof glands
Technical Specifications
PERFORMANCE | |
Throughput | Up to 500Mbps net aggregate |
Packet performance | More than 1 million packets per second (line rate) |
Latency | 0.5-3 ms one-way, typical (depending on air frame period) |
RADIO TECHNOLOGY | |
Modulation | Cyclic single carrier |
Cyclic prefix | 1/8 and 1/16 (for 20 and 40 MHz channel width) |
Modulation schemes | Eleven modulation/coding schemes from QPSK to QAM 256, as well as QAM 1024 |
Frequency range | 4.9-6.0 GHz 6.0-6.425 GHz Other frequency bands will be supported in future releases |
Channel widths | 10, 20 and 40 MHz |
Spectral efficiency | Up to 13 bps/Hz |
Transmit power | Up to 27 dBm (average, per Tx chain) @ QPSK to QAM 64 Up to 26 dBm @ QAM256, Up to 18 dBm @ QAM 1024 |
Receiver sensitivity | down to -95 dBm @ 10 MHz, QPSK (4.9-6.0 GHz) down to -93 dBm @ 10 MHz, QPSK (6.0-6.425 GHz) |
System gain | Up to 178 dB (based on a 28 dBi integrated antenna in 10 MHz channel width) |
Duplex Scheme | TDD, Hybrid-FDD |
Antenna | - Integrated: dual-polarization flat panel 23, 24, 26, 27, 28 dBi (selectable at time of ordering and model-dependent) - Connectorized: 2x N-type (Female) connectors for external dual-polarization antenna |
Maximum range | In excess of 100 km in clear line-of-sight conditions, with use of high gain external antennas |
AIR PROTOCOL | |
Air Frame | Configurable, 2 to 10 ms |
Uplink/downlink ratio | Configurable, from 50:50 to 90:10 in any direction |
Automatic modulation control | Fully supported |
Automatic ranging | Fully supported |
TDD synchronization | Fully supported, via built-in GLONASS/GPS receiver or IEEE1588 PTP |
WIRED INTERFACES | |
Ethernet | 2x 10/100/1000-BaseT copper ports, RJ-45: GE0 – Data+PoE input GE1 – Data only SFP port: various 3rd party single and multi-mode fibre module sare supported Either of the ports can be configured independently for management, user data or for a hybrid mode |
PoE | 802.3at or proprietary “passive” PoE |
Cable Length | Copper Ethernet cable length: up to 100 m between outdoor unit and the primary network connection Fibre cable length: up to 300 m or more depending on the SFP module type |
QOS AND NETWORK PROTOCOLS | |
QoS | 4 queues |
Prioritisation | “Strict” and “Weighted Round Robin” modes |
Packet classification | 802.1p |
Network protocols | VLAN, IGMP, STP |
Timing Transport | IEEE 1588 v2, transparent clock |
MANAGEMENT AND INSTALLATION | |
LED Indications | Power status, wireless and wired link status, RSSI indication, TDD sync status |
Management Protocols | HTTP, telnet, SNMP v1/2c/3 (MIB-II and proprietary MIBs) |
Web GUI Tools | Antenna alignment tool, Spectrum Analyzer |
PHYSICAL | |
Weight and dimensions | Please refer to the data table below |
Operating temperature range | -40° to +60°C |
Dust and water protection | IP66, IP67 |
Wind Load | 160 kph, operational; 200 kph, survival |
Power Supply | IDU-BS-G: 90-240 VAC, 50/60 Hz, 0°C to +40°C, 125x72x38 mm, 0.3 kg |
Input DC Range | ±43 to ±56 VDC |
Consumption | Maximum of 30 W |
ACCESSORIES | |
Spare Mounting Brackets | MONT-KIT-85 or MONT-KIT-85s |
DC Injector | AUX-ODU-INJ-G (indoor/outdoor installation) |
External lightning protection | AUX-ODU-LPU-G |
COMPLIANCE | |
Safety | EN 60950-1:2006, UL 60950-1 2nd ed. |
Radio | EN 301 893 v.1.8.1, EN 302 502, v.1.2.1, FCC part 15.247 |
EMC | ETSI EN 301 489-1, ETSI EN 301 489-17, FCC Part 15 Class B |
ROHS | Directive 2002/95/EC |
Product Family
Model | Capacity | Antenna | TX Band | Frequency Band | Range | Weight and Size |
Frequency range 5 GHz | ||||||
Xm/5X.500.2x500.2x23 | up to 500 Mbit/s | Flat-panel, 23 dBi, 10x10 deg | up to 27 dBm | 4900-6000 MHz | 30km | 305х305х67 mm 2.4 kg |
Xm/5X.500.2x500.2x26 | up to 500 Mbit/s | Flat-panel, 26 dBi, 8x8 deg | up to 27 dBm | 4900-6000 MHz | 50km | 371х371х89 mm 3.3 kg |
Xm/5X.500.2x500.2x28 | up to 500 Mbit/s | Flat-panel, 28 dBi, 5x5 deg | up to 27 dBm | 4900-6000 MHz | 70km | 600x600x74 mm 6.3 kg |
Um/5X.500.2x500 | up to 500 Mbit/s | 2xN-type (Female) | up to 27 dBm | 4900-6000 MHz | 100+ km | 256x240x86 mm 2.1 kg |
Frequency range 6 GHz | ||||||
Xm/6X.500.2x500.2x24 | up to 500 Mbit/s | Flat-panel, 24 dBi, 9x9 deg | up to 27 dBm | 6000-6425 MHz | 30 km | 305х305х67 mm 2.4 kg |
Xm/6X.500.2x500.2x27 | up to 500 Mbit/s | Flat-panel, 27 dBi, 5x5 deg | up to 27 dBm | 6000-6425 MHz | 60km | 600x600x74 mm 6.3 kg |
Um/6X.500.2x500 | up to 500 Mbit/s | 2xN-type (Female) | up to 27 dBm | 6000-6425 MHz | 100+ KM | 256x240x86 mm 2.1 kg |
Data Sheet
Ordering Information
For more information please contact Case Communications