HighlightsHardware SpecificationSoftware SpecificationsOrdering InformationData Sheet
PIGE 12T 4GB MX-Industrial Gigabit POE+ Ethernet Switch
The Case Communications PIGE 12T 4GB MX is a Gigabit Ethernet switch with 12 x 10/100/1000T ports and 4 x Mini GBIC SFP ports. Of the 12 Ethernet ports 6 are Gigabit PoE+ (IEEE 802.3at) ports, and the other 6 are Gigabit PoE (IEEE 802.3af)
The PIGE 12T4GB MX supports X-Ring+ which provides rapid self-healing in under 10ms in the event of a failure, and supports up to 250 switches per ring.
The Case Communications PIGE 12T 4GB-MX supports IEEE 1588v2 hardware which is a precise timing protocol with nano-second-level timing. IEEE 1588v2 is used in automation industries, while PoE+ allows users to connect devices such as CCTV, and 802.11a WiMAX devices directly to the switch.
Mini GBIC
4 x Mini GBIC slots allow the connection of 100 / 1000Mbps Fibre SFP transceivers with DMI (Dynamic Management Interface)
Relay Alarm system
A relay alarm system immediately notifies of power failure / and or port down events.
Events are sent to a pre-define e-mail address
PIGE 12T4GB MX-Industrial Gigabit POE+ Ethernet Switch
PIGE 12T 4GB MX-Industrial Gigabit POE+ Ethernet Switch Highlights
| 10/100/1000T/TX (PoE+) ports | 12 x 10/100/1000T |
| PoE Ports | 6 x Poe Plus ports (IEEE 802.3at), 6 x PoE (802.3af) |
| 100 / 1000Base-X/FX SFP Slots | 4 Via Mini-GBIC |
| Switching | Layer 2 |
| Backplane / PPS | 32Gbps / 48Mpps |
| X-Ring + Support | Up to 250 switches |
| IEEE 1588v2 | For Precise Timing Application |
| PoE+ | IEEE 802.3at |
| D.M.I | (Dynamic Management Interface) |
| Alarm output | Relay Port |
| Installation | DIN rail installation |
PIGE 12T 4GB MX-Industrial Gigabit POE+ Ethernet Switch Dimensions
X-Ring+ Technology
The PIGE 12T4GB-MX uses the patent-pending “X-Ring+” feature which provides an auto-recovery-path within 10ms when the primary network path has failed. The ring can be established with up to twenty (250) Industrial Switches.
X-Ring+, Dual homing, allows two independent points out of the ring and Ring Coupling allows up to 99 Rings to be inter-connected. Please click here to read the X-Ring+ White Paper
PIGE 12T 4GB MX-Industrial Gigabit POE+ Ethernet Switch Key Features
| PHYSICAL | |
| Physical ports | 12 x Rj45 10/100//1000T – Auto MDI/MDI-X |
| Power Over Ethernet | 6 x PoE+ (802.3at) & 6 x PoE (802.3af) |
| Backplane switching / Packets per second at 64bytes | 32Gbps / 48 Million packets per second |
| Protection | IP 30 |
| Installation | DIN Rail |
| Dimensions | 86 mm(W) x 165mm(H) x 112.6mm (D) |
| Packet Buffer | 1.5MByte |
| Jumbo Frames | 12K |
| MAC Address Table | 16,000 entries |
| ENVIRONMENT | |
| Operating Temperature -400C ~ +750C(-400F~1670F) | Storage Temperature -400C ~ +850C(-400F~1850F) |
| Operating Humidity 5 ~ 95% (non-condensing | Storage Humidity 5 ~ 95% (non-condensing |
| POWER | |
| Input Power (System) | 48 vdc dual inputs (46 ~ 57VDC) |
| PoE Power Input | 50 VDC input (PoE+ output recommended) |
| Power Connector | Terminal Block |
| Power Consumption | 21.82 Watts max |
| LED INDICATORS | |
| System LEDs | Power1, Power 2 |
| Power Over Ethernet | Alarms |
| Port LEDS | Link / Activity |
Hardware Specification
| Back-plane (Switching Fabric): | 32Gbps |
| Transfer rate | 14,880pps for Ethernet port 148,800pps for Fast Ethernet port 1,488,000pps for Gigabit Fibre Ethernet port |
| Packet throughput ability (Full-Duplex) | 48Mpps @64bytes |
| Mac Address | 16K Entries |
| Packet Buffer | 1.5MB |
| Flash ROM | 256 MB |
| Protocol | CSMA/CD |
| Housing | 86mm (W) x 165mm (h) x 126mm (d) |
| Protection | IP 30 |
| Number of Fans | (0) Nil Fanless |
| Connectors | 10/100/1000T / TX PoE+: 12 x ports RJ-45 with Auto MDI/MDI-X function RS-232 connector: RJ-45 type Gigabit fibre: 4 x Mini-GBIC socket 100 / 1000Base-X / FX SFP Slots |
| Installation | DIN rail |
Software Specification
| REDUNDANT / RESILIENCE CAPABILITIES | |
| Ring technology | X-Ring + rapid self healing <10ms |
| Dual Homing topology | Supported |
| Ring coupling | Up to 99 rings |
| Maximum switches per ring | Up to 250 Nodes |
| Supports STP | Spanning Tree Protocol (IEEE802.1d ) |
| Supports RSTP | Rapid Spanning Tree Protocol (IEEE802.1w) |
| Supports MSTP | Multiple Spanning Tree Protocol (IEEE 802.1s) |
| BDFU Filtering | Protection against loops in the ring |
| BDPU/Loop | Prevents bridging loops |
| BDPU Root Guard | Prevents switches connected on ports configured as access ports from becoming the root switch. |
| Port Trunk with LACP | Link Aggregation (Static and 802.3ad) |
| Dual Image | Multiple Start-up configuration (future release) |
| Embedded watchdog | |
| X-ring | |
| VLANS | |
| Tagged VLANS (IEEE 802.1Q ) | VLAN based on port (IEEE 802.1v ) |
| VLAN Based on MAC Address | Protocol or IP subnet |
| GVRP (GARP VLAN Registration Protocol) | Double Tagging Q-In-Q for provider backbone networks (IEEE 802.3ac) |
| MONITORING & DIAGNOSTICS | |
| LED Indicators | Port Mirroring |
| System Log, Internal, remote sys log servers | LLDP-MED (Media Endpoint Discovery ) protocol |
| Both SNMP Traps and E-Mail alarms and events | RMON Groups1,2,4 and 9 |
| LLDP (Link Layer Discovery Protocol) (IEEE 802.1ab) | SNMP MIBS – 1213, 1493, 1643, 2233, 2618, 2674, 2737, 2819 |
| CAT-5 Cable length diagnostics | Reset button for auto image / configuration upgrade |
| ADVANCED (QoS) QUALITY OF SERVICE | |
| Full duplex flow control (IEEE 802.3x) | Traffic shaping |
| Priority queuing | Traffic Policing with two rate three colour marking |
| Several packet scheduling systems | Traffic congestion control (RFC 896) |
| Full duplex flow control (IEEE 802.3x) | Jumbo Frames 12KB |
| Supports IEEE 802.1p provisioning and mapping | (Qos / CoS / ToS/ DSCP) |
| 8 Priority queues | Strict priority and weights round scheduling |
| Egress rate shaping | Broadcast storm control |
| Bandwidth control | |
| BANDWIDTH CONTROL | SYSTEM EVENT LOGS |
| Ingress Packet Filter and Egress Rate | System Log Server/Client |
| Limit: Broadcast/Multicast Packet Filter Control | SMTP e-mail Alert |
| Relay Alarm Output System Event | |
| TRAFFIC FILTERING SYSTEM | PORT MIRRORING |
| Static MAC Filtering | Monitor traffic in switched networks. |
| ACL (Access Control List) | TX Packet only |
| Filtering based on Ethernet or TCP/IP headers | RX Packet only |
| Protected ports | Both TX and RX Packet |
| MULTICAST | SECURITY |
| IGMPv3 snooping | Port Access Control MAC Filtering |
| IGMP Querier | MAC Violation IP Access security DHCP Server |
| MLDv2 Snooping | Port IP Binding |
| MLD Querier | Auto IP-MAC binding with ARP inspection |
| GMRP | User Authentication AAA (Authentication, Authorisation and Accounting) |
| Static IP Multicast filtering | SSL / SSH Secure access (RFC 4251, RFC 4253, RFC 4254 ) SFTP Secure FTP |
| PORT TRUNKING | POE |
| Static LAG Link Aggregation Group | PoE Power management |
| IEEE 802.3ad LACP Link Aggregation Protocol | |
| OTHER SERVICES | |
| DHCP Client / Server (RFC 2131)(RFC 2132) | L2 DHCP Relay Agent |
| TACAS+RADIUS (RFC 2865)(RFC 2866) | SNTP (Simple Network Time Protocol) (RFC 2030) |
| DNS (Domain Name Service) (RFC 1034)(RFC 1035) | |
| MANAGEMENT | |
| SNMP Traps | SNMP v1 / v2/v3 ((RFC 1157)(RFC 1901) (RFC 1908) |
| Cisco Like CLI | Web GUI |
| Telnet | RMON |
| Alarm LED | Alarm Mails |
| System Log | Text based configuration |
| Multi function reset button | DNS Client |
| DHCP L2 Relay | DHCP Server with port based IP binding |
| SNTP | Local RTC |
| Interface alias | USB configuration back up / restore |
Standards and Certifications
| IEEE STANDARDS | RFC |
| 802.1AB LLDP | 768 User Datagram |
| 802.1ad Provider Bridging | 783 TFTP Protocol |
| 802.1D Spanning tree Protocol | 791 Internet Protocol |
| 802.1p Class of Service | 792 Internet Control Message Protocol |
| 802.1Q VLAN Tagging | 793 Transmission Control protocol |
| 802.1s Multiple Spanning tree protocol | 826 Ethernet Address Resolution protocol |
| 802.1w Rapid Spanning Tree Protocol | 896: Congestion Control in IP / TCP Inter-networks |
| 802.1x Authentication | 951 BOOTP |
| 802.3 10BaseT | 1034 Domain Names – Concepts and Facilities |
| 802.3ab 1000BaseT(x) | 1035: Domain Names – implementation and specification |
| 802.3ac VLAN Tagging | 1157: SNMP |
| 802.3ad Port trunking with LACP | 1321: MDS Message-Digest Algorithm |
| 802.3af PoE | 1534: Inter-operation between DHCP and BOOTP |
| 802.3at PoE+ | 1541: DHCP |
| 802.3u 100Base T(x) and 100 base FX | 1901: Community-based SNMPv2 |
| 802.3x Flow control | 1908: Coexistence between version 1 and version 2 of the Internet-standard Network Management Framework |
| 802.3z 1000BaseX | 2030: SNTP Version 4 for IPv4, IPv6 and OSI |
| 2068: HTTP | |
| 2131: Dynamic Host Configuration Protocol | |
| 2132: DHCP Option and BOOTP Vendor Extensions | |
| 2866: RADIUS Accounting | |
| 2865 RADIUS | |
| 3580: IEEE802.1X RADIUS Usage Guidelines | |
| 4251: SSH Protocol Architecture | |
| 4253: SSH Transport Layer protocol | |
| 4254: SSH Connection Protocol | |
| CERTIFICATES | |
| Safety | CE, FCC Class A, UL 60950 and UL 508 |
| Hazardous Environment: | UL / cUL Class-1 Division 2 Groups A/B/C/D |
| Marine | DNV Compliant (Preliminary) |
| Railway | EN50121-4 Compliant |
| EMC | CE, FCC Class A EN 61000-6-4 EN 61000-6-2 EN 61000-4-2 (ESD) EN 61000-4-3 (RS) EN 61000-4-4 (EFT) EN 61000-4-5 (Surge) EN 61000-4-6 (CS) EN 61000-4-4 (Magnetic Field) EN 61000-4-11 (DIP test) IEC 61850-3 Electric Utility Substation |
| Shock | IEC 60069-2-27 |
| Drop | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
Ordering Information
| Model Name | Description |
|---|---|
| PIGE-12T4GB-MX | 12x 10/100/1000T/TX PoE+, plus 4 x 10/100/1000T/Mini-GBIC Combo w/X-ring Managed Industrial Switch |
PIGE 12T 4GB MX-Industrial Gigabit POE+ Ethernet Switch Data Sheet
For more information please contact Case Communications