10Gbps L3 Industrial Rackmount switch with PoE
| 598 Gbps Switching Capacity | 32MB of Buffer |
| 107.14 Mpps | 32K MAC Addresses |
| 1GB RAM | 4,000 VLANS |
Physical Layout of the R3-8P-24S-4X-G
|
A= Power On Indicator |
D =4 x 1 / 10Gbps SFP Ports |
|
B= 8 x PoE/PoE + Ports |
E= Console Port |
|
C = 24 x 1.25Gbps SFP Ports |
F= Dual AC / DC Input |
Overview
The Case Communications R3-8P-24S-4X-G is supplied with 8 x 10/100/1000Mbps PoE/PoE+ ports, 24 x 100 / 1000 SFP Ports and 4 x 10Gbps SFP Ports. It has a 598 Gbps non-blocking backplane and can switch 107.14 Million packets per second. It has 32MB of buffer, 128MB of FLASH and 1GB of RAM, ensuring its able to cope with the highest demands.
The Case Communications R3-8P-24S-4X-G 10Gbps L3 Industrial RackMount Ethernet Switch has layer 3 network management functionality and supports IPv4 / IPv6 management and static route full line rate fowarding. Routing between VLANS also provides segmentation and flexibility.
The R3-8P-24S-4X-G supports multiple network redundancy protocols such as STP (Spanning Tree Protocol (802.1D)), RSTP Rapid Spanning Tree Protocol (802.1w))>, MSTP (Multiple Spanning Tree Protocol (802.1s)) and ITU-T G.8032 (ERPS (Ethernet Ring Protection Switching).
The G.8032 Recommendation to provide sub-50ms protection and recovery switching for Ethernet traffic in a ring topology and at the same time ensuring that there are no loops formed at the Ethernet layer.
The Case Communications R3-8P-24S-4X-G can be managed via a Web Browser, CLI, Console, or SNMPv1 / v2C , V3. the connection can be secured using HTTPS (Hypertext Transfer Protocol Secure) , SSLv3 (Secure Socket Layer V3) and SSHV1/V2 (Secure Shell ) for secure management.
The R3-8P-24S-4X-G supports RMON (Remote Network Monitoring), a system log, port traffic statistics, and easy viewing of the networks optimisation. Diagnostics include CPU Utilisation, Memory Monitoring Ping detection, and cable length detection.
The Case Communications R3-8P-24S-4X-G supports dynamic or static binding for the users, via an IP Address, MAC Address, VLAN or Ports etc. The R3-8P-24S-4X-G supports ‘Port Isolation’ to prevent communications between two neighbouring devices within the same broadcast domain, which improves network stability. The R3-8P-24S-4X-G also supports ‘Storm Control’ and can suppress broadcast, Multi-cast and unicast storms.
Support for specific ARP inspections can effectively prevent ‘ARP Spoofing attacks’ which can be created by hackers or attackers via ARP Packets.
Hardware Features
| Hardware Features | |
| Interfaces | 8 x 10/100/1000BaseT (IEEE 802.3af / at) PoE |
| 24 x 100/1000base-x SFP Ports | |
| 4 x 1Gbps / 10Gbps SFP Ports | |
| 1 x Console RS232 (115,200, N,8,1) | |
| Ethernet Standards | IEEE 802.3 10Base-T, IEEE 802.3i 10base-T |
| IEEE 802.3u 100Base TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-X | |
| IEEE 802.3ae 10GBase-SR/LR, IEEE 802.3x | |
| Ethernet Port Features | Ports 1 - 8 Support 10/100/1000 Base-T, auto-detect, full / half duplex, MDI / MDI-X Adaptive operation |
| Forwarding Mode | Store and Forward at Full Wire Speed |
| Switching Capacity | 598 Gbps (Non-Blocking) |
| Forwarding rate (64 Byte) | 101.14Mpps |
| Memory | CPU 416MB, Buffer 32MB, FLASH 128MB, RAM 1GB |
| MAC Addresses | 32,000 |
| VLANS | 14,000 |
| Twisted pair transmission | 10Base-T Cat3, 4,5 UTP (100Metres) |
| 100Base-TX Cat 5 or later UTP (~100 Metres) | |
| 1000Base-T Cat5e or later UTP (~100Metres) | |
| Power Supply Pins | Default 1/2 (+), 3/6 (-) |
| Max Power Input | AC100 - 240vac 50-60Hz, 4.1A |
| Power Consumption | Standby <25W: Full Load 250W |
| Power Input | Dual Input Power Interface: AC Power Supply takes priority, support for anti-reverse protection. |
| power-off automatic switching DC Connection 2 x DC 12-48vdc | |
| 1 Way Alarm Switch | |
| LED Indicators | Power Indicator (PWR): Yellow. System Indicator (SYS) Yellow. Network Indicator (Link) Yellow, PoE Indicator (PoE) Green, Fibre Port Indicator (L/A) Green |
| Reset Button | Single Key to restore to factory setitngs |
| Operating temperature | -40C ~ +80C, 5% ~ 90% RH Non-Condensing |
| Storage Temperature | -40C ~ +85C, 5% ~ 95% RH Non-Condensing |
| Housing Dimension | 440mm(L) x 300mm(W) x 45m(H) 1U height |
| Housing Protection | IP40 |
| Housing weight | <4.5Kg gross weight <5.2Kg |
| Protection Levels and Standards | |
| Lightning Protection : 6Kv / 8/20us | |
| IEC 61000-4-2 (ESD) + 8Kv Contact Discharge, 15KV Air Discharge | |
| IEC 61000-4-3 (RS): 10V/m (80 ~ 100Mhz) | |
| IEC 61000-4-4 (EFT) Power Cable: +/-4Kv: Data Cable +/-2Kv | |
| IEC 61000-4-5 (Surge): power cable: CM +/- 4Kv V/DM +/- 2Kv: Data cable: +4Kv | |
| IEC 61000-4-6 (Radio Frequency Transmission): 10V (150Khz - 80Mhz) | |
| IEC 61000-4-8 (Power Frequency Magnetic Field): 100A/m; 1000A/m, 1s to 3s | |
| IEC 61000 4-10 (Damped OScillation): 30 A m 1Mhz | |
| IEC 61000-4-12 (Shockwave): CM 2.5Kv, DM 1Kv | |
| IEC 61000-4-16 (Common Mode Transmission): 30V; 300V, 1s | |
| IEC 61000-6-2 (Common Industrial Standard) | |
| FCC Part 15 / CISPR22 (EN 55022): Class A | |
| IEC 600068- 2-6 (Anti-Vibration) | |
| IEC 60068-2-7 (Anti-Shock) | |
| IEC 60068-2-32 (Free Fall) | |
| Certification | CE Mark: CCC, Commercial CE / LVD EN 60950; FCC Part 15 Class B; ROHS |
Software Features
| Software Features | |
| Interface | Broadcast storm suppression for ports |
| Data Rate limiting for incoming and offline traffic. Min rate 64Kbps | |
| Temperature Protection Setting | |
| Energy saving configuration (EEE) for Ethernet port | |
| Total Power limit for PoE Power Supply | |
| PoE Management | PoE Output power per port, Closed / af / at |
| PoE Output priority configuration for each port | |
| PoE Status display per port | |
| Power delay start | |
| PoE work time and scheduling | |
| Layer 3 Features | Support for Protocol based VLANS, with routing between them |
| Layer 3 Management Facilities | |
| 1024 ARP Protocol entries | |
| Static default routes up to 128 entries | |
| VLANS | IEEE 802.1q VLANS |
| 4000 Port Based VLANS | |
| Support for Access, Trunk, Hybrid VLAN Port types | |
| Port Aggregation | Support for LACP |
| Support for 8 aggregation groups, each group with 8 ports | |
| Resilience | STP (IEEE 802.1d) |
| RSTP (IEEE802.1w) | |
| MSTP (IEEE 802,.1s) | |
| G.8032 (ERPS ) self healing 50ms, Max of 256 Rings with 1024 devices per ring | |
| Multicast | IGMP Snooping V1 / V2 Support for 1024 Multicast groups |
| Support for a user quick departure mechanism | |
| Support for MLD Snooping V1 / V2 | |
| Support for Multicast VLANS | |
| Access Control Lists | Access Control based on source MAC address, Destination MAC Address |
| Source IP Address, destination IP Address, IP Protocols TCP / UDP Port | |
| TCP / UDP Port range, VLAN and ACL's based on ports and VLANS | |
| User selected password protection | |
| Security Features | |
| IEEE 802.1x Authentication / Centralised MAC Address Authentication | |
| AAA and RADIUS Authentication | |
| MAC Address learning restrictions | |
| Support for MAC Address black holes | |
| SSHv2 Secure password for user logins | |
| SSL for secure transmission | |
| Support for port isolation | |
| Data Rate limiting for ARP Messages | |
| Support for IP Source Address protection | |
| Support for ARP intrusion detection | |
| Protection against DoS Attacks | |
| Support for port broadcast message suppression | |
| Support for hos back-up mechanism | |
| Binding mechanism of IP +MAC + VLANS Ports | |
| DHCP Client | |
| Quality of Service | 8 Output queues per port |
| Support for 802.1p / DSCP Priority Mapping | |
| Queue scheduling mechanism (SP, WRR, SP+WRR) Priority Tag Mark / Remark | |
| Stream based packet filtering, stream based re-direction | |
| Flow based data rate limiting | |
| Layer 2 to layer 4 packet filtering, matches the first 80 bytes of the message | |
| DHCP | DHCP Snooping, DHCP Server, DHCP Relay |
| Management and Maintenance | Console / Aux / Modem / Telnet / SSH 2.0 CLI Command Line |
| Bi Directional Traffic Monitoring per Port | |
| Web Network Management (HTTPS) | |
| FTP, TFT, XModem, SFTP File Download Management | |
| SNMP V1 / V2c / V3 | |
| Support for NTP (Network Timing Protocol) Clock | |
| System Log | |
| Ping Detection | |
| CPU Real Time Utilisation Status | |
| Support for Link Layer Discovery Protocol (LLDP) | |
| Heat Dissipation | Low Noise active cooling |
Downloads
R3-8P-24S-4X-G.pdf (148 downloads)
Layer 3 G Series Ethernet Switch Web Manual (31 downloads)
Case G Series L3 Ethernet Switch CLI manual (33 downloads)
Ordering Information
R3-8P-24S-4X-G– Industrial Rackmount Ethernet Switch with 4 x 1Gbps / 10Gbps SFP, 24 x 1Gbps SFP, and 8 x 10//100/1000tx PoE / PoE+ Ports
For more information please contact Case Communications.