PIXE L3 8T 4X 1Gbps Layer 3 Industrial 90W PoE Ethernet Switch

PIXE L3 8T 4X – 1Gbps Layer 3 Industrial 90W PoE Ethernet Switch

Key Features

Overview of the PIXE L3 8T 4X 1Gbps Layer 3 Industrial 90W PoE Ethernet Switch

The Case Communications PIXE L3 8T 4X is a 1Gbps Layer 3 Industrial PoE Ethernet Switch, that has been designed for Industrial Ethernet Applications and applications requiring power. For example CCTV, and Wireless access Points. The switch is equipped with 6 Gigabit PoE +Ports  and 2 PoE ++  (bt) ports capable of supplying 90 watts of power, and 4 x 10Gbps, 2.5Gbps   / 1.25 Gbps SFP Ports. The PIXE L3 8T 4X supports Redundant Ring technology in the form of ERPSv2 as well as STP, RSTP and MSTP. It also supports Layer 3 routing using RIP v1 / v2 and IPv6 RIPng, OSFPv2 & Iv6 OSFPv3, BGP4 and IPv6 BGP4+ as well as Policy and Static Routes

 

Hardware

• Operating temperature -40C ~ +75C
• Housing – Fanless IP 30
• Dual DC power supplies with anti-reverse connection, over and under voltage protection
• Backplane 128Gbps
• Ports 8 x  Gigabit PoE at (15W) / PoE af (30W) two of which support PoE bt (90W)
• 4 x 10Gbps SFP Ports
• Environmental temperature and humidity detection, allows real-time monitoring of the environment

Applications

The PIXE L3 8T 4X 10Gbps Layer 3 Industrial PoE Ethernet Switch has 6 x at / af  (30w/15w) and 2 x bt (90w) PoE Ports and is an ideal switch to provide Wi-Fi Access Points, access to IP Phones or CCTV devices. Using embedded security, the users can work with confidence and authorised users can have access to the network and network devices.

Resilience

• Support for Spanning Tree Protocol (IEEE 802.1D), Rapid Spanning Tree Protocol (IEEE 802.1w) and Multiple Spanning Tree Protocol (IEEE 802.1s), and Ethernet Ring Protection Switching ERPSv2.
• Support for IPv4 and IPv6 Multicast functions
• Support for Traffic Classification of each field in L2 / L3 / L4 Protocol Headers
• Support for IGMP v1 / v2 / v3, IGMP Snooping and MLD (Multicast Layer Discovery)

Security

• Broadcast Storm Control
• CLI (Console Telnet (RFC 854), Web (HTTPS), SNMP v3
• Voice VLAN, Surveillance VLAN (Auto or Manual), Multicast VLAN Registration (MVR)
• HTTPS / SSL v2/v3, TLSv1, RADIUS, TACAS+, AAA, SSH v1,v2
• Support for DHCP Snooping, Option 43 / 82, 802.1X Security Access
• Support for Hierarchical Management
• ACL Access Control Lists
• Support DOS (denial of service attack), Port-based MAC filtering / binding, MAC Whitelist

Network Functionality

• Support for OSPFv2, RIPv2 and Static routes
• Port-based VLANS, IEEE 802.1Q VLANS, and GVRP to ease network planning
• Support for LACP, ERPSv2
• 4 Class of service ( Port based, 802.1p, IP TOS precedence, IP DSCP) Trusted QoS, Rate Limitations

Specifications

HARDWARE SPECIFICATIONS
Fibre Ports	4 x 1Gbps / 10Gbps / 2.5Gbps SFP
PoE Ports	Ports 1-2 PoE ++ bt Max 90W Ports 3-8 Support af/at Max 30W
PoE Pins	Af / At 12+ 36- PoE++ (bt) 12+ 45+ 36- 78-
PoE Bridge	Max 360 Watts
CPU	MIPS-34Kc 800MHz
DDR	2G DDR3
FLASH	512Mbytes
RAM	256Gbyte
MAC Addresses	16K
Packet Buffer	12Mbit SRAM Packet Buffer
Jumbo Frames	Jumbo frame up to 12KB
IEEE 802.3az	Supported
VLAN Addresses	4K
Quality of Service Queues	8
Link Aggregation	Supports 32 trunk groups with up to 8 members per group
Layer 3 Routing	IPV4 supports 6K; IPV6 supports 2K;
LED Indicatiors	Port:1-8 LINK LED Port:1-8 PoE LED Port: 9-12 SFP LED
	V1: DC 1 IN V2: DC 2 IN SYS: PoE DOG on/off PW: POWER LED
Power Input	Dual DC POWER Input
Power Consumption	48-57Vdc Max 400W
Temperature	Operating Temperature-40～+75°C; 5%～90% RH Non coagulation
	Storage Temperature -45～+85°C; 5%～95% RH Non coagulation
Dimension	160mm*130mm*50mm Packaging 310mm*210mm*60mm
Net Weight / Packaged	1.1kg/1.6kg
Protection Level	IP30
Lightning Protection	6KV 8/20us;
Installation	DIN Rail
FEATURES
Port Shutdown	Supported
Port Speed	Supports auto-negotiate, full-1000, full-100, half-100, full-10, half-10
Control	Support full-duplex IEEE 802.3x, half-duplex back pressure
Storm Control	Supports rate limit for broadcast, multicast, and DLF packets
Storm Constrain	Supports the detection of broadcast packets, multicast packets, or unicast packets on the ports, shutdown the port if the rate is over the threshold.
Port Mirror	Supported
Port Rate Limit	Supports port ingress and egress rate limit
Link Aggregation	Support for manual link aggregation
	Support for LACP dynamic link aggregation
	Supports up to 32 aggregation groups, each group up to 8 ports
	Support for source MAC, destination MAC, source destination MAC, source IP, destination IP, source destination IP routing strategy
Port Isolate	Supported
Jumbo Frame	Support for up to 16KB packet
Redundant Port	Supported
The DDM of fiber ports	Supported
MAC ADDRESSES
MAC Table Capacity	16K
MAC Table Management	Supported
Forwarding Mode	Support for IVL Forwarding mode
Static MAC Address	Supported
MAC Address Binding	Supported
MAC Address Filtering	Supported
MAC Learning Control	Controls MAC Learning based on the port
VLANS
Number of VLANS	4K
802.1q based VLAN	Supported
MAC Based VLAN	Supported
IP Based VLAN	Supported
Protocol based VLAN	Supported
PVLAN	Supported
Voice VLAN	Supported
VLAN Mapping	Support for 1:1 mapping
Q-in-Q	Support for basic Q-in-Q and Support for flexible Q-in-Q
RELIABILITY
Spanning Tree Protocol	Support for STP/RSTP/MSTP
Port Loop Detection	Supported
EAPS	Supports RFC3619
ERPS	Supports G.8032/Y.1344 Ring Technology
LLDP	Supports LLDP & LLDP-MED
UDLD	Fully compatible with CISCO's UDLD protocol
VLLP (VRRP Layer-2 Loop Protection)	Supported, only used with VRRP
L3 FEATURES
ARP	Supports static and dynamic ARP
Static Route	Supports static route based on IPv4 and IPv6
VLAN Interfaces	Supports 32 VLAN interfaces
RIP	Supports RIP v1/v2 & IPv6 RIPng
OSPF	Supports OSPFv2 & IPv6 OSPFv3
BGP	Supports BGP4 & IPv6 BGP4+
Policy Routing	Supported
VRRP	Supported
SSH Client	Supports SSH Client based on IPv4 and IPv6
MULTICAST
Static Multicast MAC Address	Supported
IGMP Snooping	Support IGMP SNOOPING v1/v2/v3
	Support IGMP Querier
	Support IGMP SNOOPING Filter
MVR	Supported
GMRP	Supported
IGMP	Support for IGMP v1/v2/v3
PIM-SM	Supported
ACCESS CONTROL LISTS
Standard IP-based ACL	Supported
Extended IP based ACL	Supported
MAC IP-based ACL	Supported
MAC ARP-based ACL	Supported
ACL Port Filtering	Supported
Time-based ACL	Supported
QUALITY OF SERVICE
Port Queue Number	8
Port Queue Scheduling Mode	Support WRR, RR, WDRR, SP
Port-based Classification	Supported
802.1p-based Classification	Supported
DSCP-based Classification	Supported
ACL-based Classification	Supported
QoS Policy	Supports packets mapping to queue
	Supports COS or DSCP Remarking
	Supports rate limits of data flow
	Supports data flow statistics
	Supports mirroring data flow
DHCP
DHCP Client	Supported
DHCP Snooping	Supported
DHCP Relay	Supported
DHCP Server	Supported
optin 82	Supported
SECURITY
Switch Management Security	Supports enabling and disabling TELNET, SSH, HTTP, HTTPS and SNMP services
	Supports TELNET, SSH, HTTP, HTTPS and SNMP services to bind to standard IP ACLs
	Support for limiting the number of TELNET and SSH connections
CPU Protection	The switch's own security protection prevents large data streams from attacking the switch itself.
AAA	Supports 802.1x and Support for a RADIUS Server
	Supports authentication, authorization, and accounting through RADIUS server
	Supports port-based and MAC-based 802.1x and Support 802.1x guest VLAN
IP MAC Binding	Supports static configuration of IP, MAC and port binding
DHCP Snooping	Supports dynamic ARP binding to prevent ARP spoofing
	Supports dynamic IP, MAC and port binding
	Support fixed port to connect to DHCP server to prevent private connection to DHCP server
Prevent ARP Spoofing	Supports manually configured MAC ARP-based ACL rules to prevent ARP spoofing.
	Supports the DHCP SNOOPING function. During the process of obtaining an IP address by DHCP, the switch dynamically binds ARP to the port to prevent ARP spoofing.
Prevents DHCP Spoofing	Supports manually configured MAC to ARP - based ACL rules to prevent ARP Spoofing. * Supports the DHCP SNOOPING function.During the process of obtaining an IP address by DHCP, the switch dynamically binds the ARP to the port to prevent ARP Spoofing
POE
Switch Control	Supports PoE Powering of ports on and off.
Power Control	Supports setitng total power
Other Advanced Features	Supports PoE Scheduling policy and PD online query
IPv6
IPv4 / IPv6 Dual Protocol Stack	Supported
IPv6 Address	Supports manual address configuration ad stateless address auto-configuration
IPv6 Neighbour discovery	Supported
ICMPv6	Supported
IPv6 Path MTU Discovery	Supported
MANAGEMENT
CLI Management	Supports Console, Telnet and SSH
	Supports multiple TELNET connections based on IPv4 and IPv6
	Supports multiple SSH connections based on IPv4 and IPv6
WEB Management	Supports HTTP based on IPv4 and IPv6
	Supports HTTPS based on IPv4 and IPv6
SNMP Management	Supports SNMP v1, v2c, v3
	Supports SNMP TRAP
	Supports lots of standard and private MIBs
	Supports SNMP and TRAP based on IPv4 and IPv6
User Management	Supports multiple user management
TACACS+	Supports switch authentication via TACACS+ server remote username and password
	Supports password encryption in PAP and CHAP mode
	Supports TACACS+ server to authorise the switch’s commands
	Supports TACACS+ based on IPv4 and IPv6
Log Management	Supports local log management
	Supports SYSLOG
RMON	Supports RMON 1, 2, 3 and 9 groups
Cluster Management	Supports NDP and Support NTDP
	Supports manual and automatic joining of cluster groups
	Supports cluster unified management
Configuration File	Supports uploading and downloading configuration file
	Supports TFTP transmission based IPv4 and IPv6
Upgrade Software	Support TFTP transmission based IPv4 and IPv6
Clock Management	Supports local clock management
	Supported SNTP
DIAGNOSTICS
PING	Supported
PING6	Supported
TRACEROUTE	Supported
TELNET Client	Supports TELNET client based IPv4 and IPv6
SSH Client	Supports SSH client based IPv4 and IPv6

Additional Information

How to configure ERPS Ring Protection on Case Communications Industrial Ethernet Switches

PIXE L3 8T 4X Data Sheet

PIXE L3 8T 4X Manual

PIXE L3 8T 4X CLI Manual

 

Ordering Information

For more information please contact Case Communications