
Front View

Front Dimensions

Dimensions
Overview
The Case Communications IMC-GB-SFP-2T (Industrial Gigabit Media Converter), is an Industrial Gigabit Media Converter, supporting 2 x 10Base-T, 100base-TX or 1000Base-TX port and 1 x 1000base SX port, via an SFP.
The IMC-GB-SFP-2T is constructed using a high strength metal housing which conforms to IP40 and its powered using a 24 volt DC power Supply (12vdc ~ 48Vdc)
The IMC-GB-SFP-2T Supports the following standards
- IEEE 802.3 / 802.3u / 802.3x / 802.3z store and forward
- Supports 2 x 10-BaseT / 100-Base-TX / 1000-Base-TX and 1 x 1000Base-SX SFP Port
- Ethernet port supports 10/100/1000Mbps auto rate detection
- Support for LFP (Link Fault Pass Through)
- DC 12 to 48v power source
- IP 40 Housing Protection
Key Features
Standards | IEEE 802.1 10-Base-T IEEE 802.3u 100Base-TX IEEE 8.2.3 100Base-FX |
Copper Interfaces | 2 x RJ45 Ports: 10/100/1000Mbps Full or Half-Duplex, Auto-Connections, full / Half Duplex or forced mode, Supports MDI/ MDI-X |
Fibre Interface | Via SFP Single or Multi-Mode, Wavelengths 850nm - 1310nm - 1550nm |
Architecture | Store and Forward |
Power Supply | 24 volts DC (18vdc~36vdc) Dual Redundant Pwr 1 x Relay port |
Power Consumption | 5 Watts at 24vdc |
Relay | Alarm relay Output |
Mechanical | IP 40 Metal Housing Installation: DIN rail mounting Weight: 500 grammes Dimensions: 60.5 (W) x 118mm( D) x 140mm (H) |
Environmental | Operating and Storage Temperature: -400C ~ +750C Ambient Relative Humidity: 10% to 95% Non-Condensing |
EMS Standards | En 61000-4-2 (ESD) Level 3 EN61000-4-3 (RS) Level 3 EN 61000-4-4 (EFT) Level 3 EN 61000-4-5 (Surge) Level 3 EN 61000-4-6 (CS) Level 3 |
Approvals | EMI: FCC Part 15 SubpartB Class A EN 5022 Class A Shock: IEC 60068-2-27 Free Fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Ordering Information
Model Name | Description |
---|---|
IMC GB SFP 2T | Industrial DIN Rail mounted Media Converter, IP40, -400C ~+750C1x1000Base-SX, Dual 10/100/1000Mbps Tx ports |
Additional Information
IMC GB SFP 2T Data Sheet
For more information please contact Case Communications