10Gbps L3 Industrial Ethernet Switch
| 512 Gbps Switching Capacity | FLASH 512MB, RAM 512MB |
| 92.32 Mpps | Maximum Frame Size 16Kb |
| 512 RAM | 4,000 VLANS |
10Gbps Layer3 Ethernet switch Features
| A= Power On Indicator | D =4 x 1 / 10Gbps SFP Ports |
| B= 8 x Gigabit Tx Ports | E= Console Port |
| C = 24 x 1.25Gbps SFP Ports | F= Dual AC / DC Input |
Case Communications R3-8TX-24S-4SX RT 10Gbps Layer3 Ethernet switch
The Case Communications R3-8Tx-24S-4SX-RT is a Layer 3 Industrial Ethernet Switch equipped with 8 x 10/100/1000Mbps Tx (Combo) ports, 24 x 100 / 1000 SFP (Combo) Ports (i.e either 24 x SFP Ports or 16 x SFP and 8 x Tx ports ) and 4 x 10Gbps SFP Ports. The switch has a 512 Gbps non-blocking backplane and can switch 92.32 Million packets per second. It has 512MB of FLASH and 512Mb of RAM, ensuring its able to cope with the highest demands.
The Case Communications R3-8Tx-24S-4SX-RT 10Gbps L3 Industrial Rack-Mount Ethernet Switch supports RIPv1 / v2 and IPv6 RIPng, OSPF v2 and IPv6 OSPFv3 as well as BGP4 and IPv6 BGP4+
The 10Gbps Layer3 Ethernet switch supports multiple network redundancy protocols such as STP (Spanning Tree Protocol (802.1D)), RSTP Rapid Spanning Tree Protocol (802.1w))>, MSTP (Multiple Spanning Tree Protocol (802.1s)) and ITU-T G.8032 (ERPS (Ethernet Ring Protection Switching).
The G.8032 Recommendation to provide sub-50ms protection and recovery switching for Ethernet traffic in a ring topology and at the same time ensuring that there are no loops formed at the Ethernet layer.
The Case Communications R3-8Tx-24S-4SX-RT can be managed via multiple managers using a Web Browser using HTTP / HTTPS (based on IPv4 & IPv6) , Multiple Telnet and SSH using IPv4 and IPv6 and SNMPv1 / v2C , V3.
SNMP v1, v2c and V3 is also supported and SNMP Traps based on IPv4 and IPv6 are supported. There are a number of standard MIBS as well as private MIBS
The R3-8Tx-24S-4SX-RT supports RMON (Remote Network Monitoring), a system log, port traffic statistics, and easy viewing of the networks optimisation. Diagnostics include CPU Utilisation, Memory Monitoring Ping detection, and cable length detection.
The Case Communications 10Gbps Layer3 Ethernet switch supports dynamic or static binding for the users, via an IP Address, MAC Address, VLAN or Ports etc. The R3-8P-24S-4X-RT supports ‘Port Isolation’ to prevent communications between two neighbouring devices within the same broadcast domain, which improves network stability. The R3-8Tx-24S-4SX-RT also supports ‘Storm Control’ and can suppress broadcast, Multi-cast and unicast storms.
Support for specific ARP inspections can effectively prevent ‘ARP Spoofing attacks’ which can be created by hackers or attackers via ARP Packets.
Hardware Features
| Hardware Features | |
| Interfaces | 8 x 10/100/1000BaseT (Combo) |
| 24 x 100/1000base-x SFP Ports | |
| 4 x 1Gbps / 10Gbps SFP Ports | |
| 1 x Console RS232 (115,200, N,8,1) | |
| Reset Key | 1 |
| Forwarding Mode | Store and Forward at Full Wire Speed |
| Switching Capacity | 512 Gbps (Non-Blocking) |
| Forwarding rate (64 Byte) | 93.32 |
| Lightning Protection | 3Kv 8/20us |
| Memory | FLASH 512M, RAM 512M |
| MAC Addresses | 16,000 |
| VLANS | 14,000 |
| Max Power Input Dual | AC 100 - 240VAC 50-60Hz, option of dual AC, 1 x AC + 1 x 12v dc or dual 12v dc |
| Power Consumption | 36 Watts |
| LED Indicators | Power Indicator (PWR): Yellow. System Indicator (SYS) Yellow. Network Indicator (Link) Yellow, Green, Fibre Port Indicator (L/A) Green |
| Operating temperature | -20C ~ +55C, 5% ~ 90% RH Non-Condensing |
| Housing Dimension | 440mm(L) x 300mm(W) x 45m(H) 1U height |
| Housing Protection | IP30 |
| Housing weight | <3.4Kg gross weight <4.1Kg Boxed |
| Certification | CE Mark: , Commercial CE / LVD EN 60950; FCC Part 15 Class B; ROHS |
Software Features
| Software Features | |
| Network Protocols | IEEE 802.3 10 Base-T, IEEE 802.3i 10Base-T IEEE 802.3u 100Base-Tx, IEEE 802.3ab 1000Base-T, IEEE 802.3x IEEE 802.3z 1000Base-X, IEEE 802.3ad, IEEE 802.3ae. |
| Port Shutdown | Supported |
| Port Speed | Auto-Negotiation, Full-1000, Full-100, Half-100, Full-10, Half -10 |
| Flow Control | Support for Full Duplex IEEE 802.3x, Half Duplex back-pressure |
| Storm Control | Support for rate-limiting Broadcast, Multicast and DLF Packets |
| Storm Constraint | Supports the detection of Broadcast packets, Multicast packets or Unicastpackets if the port rate isover the threshold |
| Port Mirroring | Supported |
| Port Rate Limiting | Support on Port Ingress and Port Egress rate limiting |
| Link Aggregation | Dupport for LACP dynamic Link Aggregation |
| Support for manual link aggregation | |
| Support for up to 32 aggregation groups, each group up to 8 ports | |
| Supports Source MAC, Destination MAC, Source & Destination MAC, Source IP, Destination IP, Source & Destination IP Routing Strategy | |
| Jumbo Frame | 16KB Frame |
| Redundant Port | Supported |
| DMI on Fibre Ports | Supports Dynamic Management Interface on SFP's |
| MAC TABLE | |
| MAC Table Capacity | 16K |
| MAC Table Management | Supported |
| Forwarding Mode | Support for IVL Forwarding ( Independant Learning VLAN) |
| Static MAC Address | Supported |
| MAC Address Binding | Supported |
| MAC Address Filtering | Supported |
| MAC Learning Control | Control of the MAC Address learning based on the port |
| VLANS | |
| Number of VLANS | 4000 |
| 802.1q-based VLAN | Supported |
| MAC Based VLAN | Supported |
| IP Based VLAN | Supported |
| Protocol Based VLAN | Supported |
| PVLAN | Supported |
| Voice VLAN | Supported |
| VLAN Mapping | Support for basic Q-in-Q, Support for flexible Q-in-Q |
| RELIABILITY | |
| Spanning Tree | Support for STP, RSTP, MSTP |
| Port Loop Detection | Supported |
| EAPS | Support for RFC 3619 |
| ERPS | Support for ^.8032 / T.1344 |
| LLDP | Support for LLDP & LLDP-MED |
| UDLD | Fully Compatible with Cisco's UDLD Protocol |
| VLLP (VRRP Layer 2) Loop Protection | Supported when used with VRRP |
| LAYER 3 FUNCTIONALITY | |
| ARP | Support for Static and Dynamic ARP |
| Static Routes | Support for Static Routes based on IPv4 & IPv6 |
| VLAN Interfaces | Supports 32 VLAN Interfaces |
| RIP | Supports RIPv1 / v2 & IPv6 RIPng |
| OSPF | Supports OSPFv2 and IPv6 OSPFv3 |
| BGP | Supports BGP4 & IPv6 BGP4+ |
| Policy Routing | Supported |
| VRRP | Supported |
| MULTICAST | |
| Static Multicast MAC Address | Supported |
| IGMP Snooping | Support for IGMP Snooping v1/v2/v3 |
| Support for IGMP Querier | |
| Support for IGMP Snooping Filter | |
| MVR | Supported |
| GMRP | Supported |
| IGMP | Supports IGMP v1 / v2 / v3 |
| PIM-SM | Supported |
| ACCESS CONTROL LISTS | |
| Standard IP-Based ACL | Supported |
| Extended IP Based ACL | Supported |
| MAC IP Based ACL | Supported |
| MAC ARP Based ACL | Supported |
| ACL Port Filtering | Supported |
| Time Based ACL | Supported |
| QUALITY OF SERVICE | |
| Number of Port Queues | 8 |
| Port Queue Scheduling Modes | Support for WRR, RR, WDRR, SP |
| Port-Based Classification | Supported |
| 802.1p Based Classification | Supported |
| DSCP Based Classification | Supported |
| ACL Based Classification | Supported |
| QOS Policy | Supports Packet mapping to queue |
| Supports COS or DSCP remarking | |
| Supports rate limiting of data flow | |
| Supports data flow statistics | |
| Supports mirroring of data flow | |
| DHCP | |
| DHCP Client | Supported |
| DHCP Snooping | Supported |
| DHCP Relay | Supported |
| DHCP Server | Supported |
| DHCP Option 82 | Supported |
| MANAGEMENT | |
| CLI Management | Support for Console, Telnet and SSH |
| Support for Multiple Telnet Connections based on IPv4 & IPv6 | |
| upport for Multiple SSH Connections based on IPv4 & IPv6 | |
| WEB Management | Support for HTTP based on IPv4 & IPv6 |
| Support for HTTPS based on IPv4 & IPv6 | |
| SNMP | Supports SNMPv1, v2c, v3 |
| Supports SNMP Traps based on IP4 & IPv6 | |
| Supports a number of standard and private MIBS | |
| User Management | Supports Multiple users |
| TACAS+ | Supports Switch Authentication via TACAS+ Server remote username and password |
| Supports password encryption in PAP and CHAP Mode | |
| Supports TACAS+ Server to authorise the switches commands | |
| Supports TACAS+ based on IPv4 and IPv6 | |
| Log Management | Supports local log management |
| Supports remote sys log server | |
| RMON | Supports RMON 1,2,3 and 9 groups |
| Cluster Management | Supports NDP |
| Supports NTDP | |
| Supports manual and automatic joining of cluster groups | |
| Supports cluster unified management | |
| Configuration Files | Supports up and downloading of configuration files |
| Supports TFTP Transmission based on IPv4 & IPv6 | |
| Software Upgrades | Supports TFTP Transmission based on IPv4 & IPv6 |
| Clock Management | Supports Local Clock Management |
| Supports SNTP | |
| SECURITY | |
| Switch Management Security | Ability to enable or disable TELNET, SSH, HTTP, SSH, HTTP, HTTPS and SNMP |
| Supports TELNET, SSH, HTTP, HTTPS and SNMP services to bind to standard ACLS | |
| Support to limit the number of TELNET and SSH Connections | |
| CPU Protection | Security mechanism to prevent large data streams from attacking the switch |
| AAA | Support for 802.1x (RADIUS) Server |
| Support for Authentication, Authorisation and Accounting via a RADIUS Server | |
| Support for port-based and MAC based 802.1x | |
| Support for 802.1 guest VLAN | |
| IP MAC Binding | Supports static configuration of IP MAC and Port Binding |
| DHCP Snooping | Supports dynamic ARP Binding to prevent ARP Spoofing |
| Supports dynamic IP, MAC and Port Binding | |
| Supports fixed port to connect to the DHCP Server to prevent private connections to the DHCP Server | |
| Prevention of ARP Spoofing | Supports the ability to manually configure MAC ARP based ACL Rules to prevent ARP Spoofing |
| Supports DHCP Snooping. While obtaining an IP Address by DHCP, the switch will dynamically bind ARP to the port to prevent ARP Spoofing | |
| IPv6 FEATURES | |
| IPv4 / IPv6 | IPv4 / IPv6 Dual protocol stack supported |
| IPv6 Addressing | Support for manual address configuration & stateless address auto-configuration |
| IPv6 Neighbour Discovery | Supported |
| DIAGNOSTIC TOOLS | |
| Ping | Support for PING & PING 6 |
| Trace Route | Supported |
| Telnet Client | Support for Telnet Client based on IPv4 and IPv6 |
| SSH Client | Support for SSH Client based on IPv4 and IPv6 |
Downloads
Configuring ERPS on Case G Series Switches (2577 downloads ) How to configure ERPS Ring Protection on Case Communications Industrial Ethernet Switches
Data Sheet R3-8Tx-24S 4SX-RT (174 downloads )
RT Series Layer 3 Switch web manual Rev 2 Web user guide for layer 3 Rackmount switches Rev 2.0 (629 downloads )
RT Series Layer 3 Switch CLI manual (1372 downloads )
Ordering Information
R3-8Tx-24S-4SX-RT– Industrial Rackmount Ethernet Switch with 4 x 1Gbps / 10Gbps SFP, 24 x 1Gbps SFP, and 8 x 10//100/1000tx Combo Ports
For more information please contact Case Communications.