Industrial 10 Port PoE+ Ethernet Switch
Key Features
- 10/100/1000 TX ports: 8 x PoE / PoE Plus
- Fibre Gigabit ports: 2 Gigabit SFP
- Switching: Layer 2
- Backplane / PPS: 20 Gbps forwarding rate 14.8Mbps
- G.8032 Support: Up to 255 rings, 1024 devices per ring
- Alarm output: Relay Port
- PSU: 48 ~ 57vdc
Overview
The Case Communications PIGE-8T-2S-G is a Managed industrial Gigabit PoE + Switch with 8 x 10/100/1000Mbps PoE / PoE+ Ports which support IEEE 802.3af/at providing up to 30 watts per port and 2 x 100 / 1000 SFP Ports
As a PoE device the PIGE-8T-2S-G can automatically detect and identify any equipment that meets the PoE standards and supplies power to that device
The PIGE-8T-2S-G supports a variety of redundancy protocols such as STP / RSTP / MSTP as well as G.8032 *ERPS) allowing communications to be recovered quickly in the even of a network failure ensuring uninterrupted communications for mission critical applications.
The PIGE-8T-2S-G is managed via a Web Interfacem CLI or SNMP Management System such as CaseView.
Ring Technology
The PIGE-8T-2S-G uses standard Spanning Tree, Rapid Spanning Tree and Multiple Spanning Tree for network resilience in ddition it can also use G.8032 Enhanced Ring Protection Protocol to provide self healing in under 50ms and support upto 255 rings.
Ethernet Ring Protection Switching, or ERPS, is has been devised by ITU-T under G.8032 Recommendation to provide sub-50ms protection and recovery switching for Ethernet traffic in a ring topology
Previous ring protocols could very occaisionally be subject to Ethernet crashes when the switch acting as the ring master switch would self heal when there was no break in the ring causing an Ethernet loop and a crash of the ring.
G.8032 ensures there are no loops formed at the Ethernet layer. G.8032v1 supports single ring topology while G.8032v2 supports multiple rings/ladder topology.
Hardware Specification
| Technical Specifications | |
| Physical Ports | |
| Tx Ports | 8 x 10/100/1000 Tx PoE / PoE+ ports |
| Fibre Ports | 2 x 100/1000Mbps SFP Fibre ports |
| Console Port | 1 x RS232 Console port (115,200Bps) |
| Physical Characteristics | |
| Packet Buffer | 4MB |
| Maximum Packet size | Up to 10K |
| MAC Address Table | 8K |
| Transmission mode | Store and Foreward (full / half duplex) |
| Performance | Backplane 20Gbps, packet rate 14.8Mpps, Transit delay <7ps |
| Power Information | |
| Power Connectors for Power In | Phoenix terminal DC Seat |
| Redundant Power Input | 48 ~ 50vdc |
| Power Supply Pins | Pins 1 / 2 (+), Pins 3 / 6 (-) 4-core power supply |
| Overload protection | Compliant |
| Reverse connection protection | Compliant |
| Power Consumption | Standby 10 Watts, full load (8 portsPoE+) 240 watts |
| Physical Properties | |
| Housing | IP40 |
| Colling | Natural fanless cooling |
| Dimensions | 165mm (h) x 148mm (d) x 54mm (w) |
| Installation | DIN Rail / Wall Mounted |
| Weight | <0.8Kg / with packaging <1.2Kg |
| Environmental Specifications | |
| Operating Temperature | -40C ~ +80C |
| Operating Humidity | 5% ~ 90% Non-condensing |
| Storage Temperature | -40C ~ +85C |
Software Specification
| Technical Specifications | |
| Support for IEEE802.3x Flow Control | |
| Support for Broadcast storm suppression based on port data rate | |
| Port Facilities | Port speed limiting for incoming and offline traffic with minimum packet rate of 64Kbps |
| Support for Port temperature settings | |
| Support for Port EEE Green Ethernet energy saving configuration | |
| PoE Management | Support for total power limit configuration on PoE Power Supply |
| Support for PoE Output power allocations per port, close / start af/at | |
| Supports PoE output priority configuration per port | |
| Supports for PoE work status per port display | |
| Supports power delay start | |
| Supports PoE work and time scheduling | |
| Layer 3 Features | Support for L2+ network management features |
| Support for IPv4 / IPv6 management | |
| Support for layer 3 soft routing forwarding | |
| Support for different network segments, communications between different VLANS is supported | |
| Support for Static Routing / default routing | |
| 128 / 1024 ARP Software forwarding | |
| VLAN | Support for port based VLANS (4K), IEEE 802.1q |
| Support for protocol based VLANS | |
| Support for Voice based VLANS | |
| Support for MAC based VLANS | |
| Support for Access, Trunk, Hybrid types of port configuration | |
| Support for Q-in-Q | |
| Port Aggregation | Support for LACP |
| Support for static polymerisation | |
| Support for 8 aggregation groups, each aggregation group supports 8 ports | |
| Spanning Tree | Support for STP (IEEE802.1d) |
| Support for RSTP (IEEE 802.1w) | |
| Support for MSTP (IEEE 802.1s) | |
| Industrial Ring Protocol | Supports G.8032 (ERPS) with a maximum of 255 loops, and 1024 devices per ring. Self healing time less than 20ms |
| Multicast | Supports IGMP Snooping V1 / V2 and 1024 multicast groups |
| Support for users quick departure mechanism | |
| Supports MLD Snooping V1 / V2 | |
| Supports Multicast VLANS | |
| Port Mirroring | Bi-directional traffic mirroring support |
| Quality of Service | Support for Diff-Serv QoS |
| Each port supports 8 output queues | |
| Support for 802.1p / DSCP priority mapping | |
| Support for queue scheduling mechanism (SP, WRR, SP+WRR) | |
| Support for priorty tag Marking / remarking | |
| Support for stream based packet filtering | |
| Support for stream based redirection | |
| Supports flow based speed limiting. | |
| ACL | Support for L2 to L4 packet filtering, matches the first 80 byte of the message |
| Filtering based on source MAC Address, destination MAC Address, Source IP address, destination IP Address, Protocol type, TCP / UDP Port, TCP/UDP Port range, VLANS and other definitions, Support for ACL based VLANS | |
| Safety Characteristics | User configurable management and password protection |
| Support for IEEE802.1x authentication / Centralised MAC Address authentication | |
| Support for AAA & RADIUS Authentication | |
| Support for MAC Address learning | |
| Support for MAC Address black hole | |
| Support for SSH 2.0 to provide secure passwords for user logins | |
| Support for SSL for secure data transmission | |
| Support for port isolation | |
| Suppot for speed limiting based on ARP Messages | |
| DHCP | Support for DHCP Client |
| Support for DHCP Snooping | |
| Support for DHCP Server | |
| Support for DHCP Relay | |
| Management and maintenance | Support for Console / AUX / Modem / Telnet/ SSH2.0 CLI Command Line |
| Secure web management (HTTPS) | |
| Support for FTP, TFTP, X-Modem, SFTP file download management | |
| Support for SNMP V1 / V2C / V3 | |
| Support for an NTP Clock | |
| Support for link layer discovery protocol LLDP | |
| Diagnostics | System Log |
| Ping Detection | |
| Cable status detection | |
| CPU Utilisation | |
| Standards and certifications | CE Mark: CE/LVD, EN 60950: FCC Part 15 Class B RoHS |
| Lightning Protection | 6KV / 8 / 20us |
| Lightning protection Level | IEC61000-4-2 (ESD) +/- 8kV contact discharge, +/- 1.5kV air discharge |
| IEC61000-4-3 (RS): 10V/m (80 ~ 100Mhz) | |
| IEC61000-4-4 (EFT) Power cable +/- 4kV: data cable +/- 2kV | |
| IEC61000-4-5 (Surge): power cable: CM+/-4kV DM +/- 2kV data cable +/- 4kV | |
| IEC61000-4-6 (Radio frequency transmission): 10V (150kHz # 80 Mhz) | |
| IEC61000-4-8 (power frequency magnetic field): 100A/m; 1000A/m, 1s to 3s | |
| IEC6100-4-9 (Pulsed magnetic field): 1000A/m | |
| IEC61000-4-10 (damped oscillation): 30A/m 1 Mhz | |
| IEC61000-4-12 (Shockwave): CM 2.5kV, DM 1kV | |
| IEC610004016 (common-mode transmission): 30V; 300V, 1s | |
| FCC Partt 15 / CISPR 22 (EN55022): Class A | |
| IEC61000-6-2 (Common Industrial Standard | |
| Mechanical Properties | IEC60068-2-6 (Anti-Vibration) |
| IEC60068-2-27 (anti-shock) | |
| IEC60068-2-32 (Free Fall) | |
Ordering Information
| Feature | Description |
|---|---|
| PIGE-8T-2S-G | 8 x 10/100/1000Tx PoE Ports TX + 2 x Gigabit SFP Ports Industrial POE Switch. Ext temp -40oC to +75oC |
Additional Information
Configuring ERPS on Case G Series Switches (1775 downloads ) How to configure ERPS Ring Protection on Case Communications Industrial Ethernet Switches
Case-PIGE-8T-2S-G-20.5.20.pdf (18 downloads )
For more information please contact Case Communications