RS-232/ RS-485 / RS422 Serial Server
Supports 1 serial ports and 1 x 10/100Base-T (Tx) self-adapting Ethernet Interface
Supports TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server, Advanced UDP and other operating modes.
Power 9 ~ 48 vdc
Operating Temperature -40C ~ +70C
Weight: 240 gms
The Case Communications 3611 Serial to Ethernet converter allows a serial device to operate over an Ethernet Network and manage serial devices and hosts in remote locations via the network. The 3611 supports 1 x RS232 / RS-485 / RS-422 serial interface and 1 x 10Mbps / 100Mbps Ethernet interface.
The 3611 Serial to Ethernet converter supports multiple network protocols, such as TCP, UDP, ARP, ICMP, HTTP, DNS and DHCP. It also allows remote management including access control and rapid configuration.
Each Serial port supports 4 TCP or UDP Sessions, and also supports a TCP Server, TCP Client, TCP Auto, UDP Advanced TCP Server, Advanced UDP Operating modes and AT, Web access modes.
A management tool based on a Windows platform can guide the user to manage and configure the 3611.
The Case Communications 3611 Serial to Ethernet converter operates from -40C to + 70C without fans and has low power consumption, making it ideal for use in harsh environments.
Based on 32 bit Arm Processor
10/100Base-T(Tx) Self-adaptive Ethernet Interface
Auto MDI / MDIX, allowing connection via a straight or cross-over cable
Non-Blocking 300bps – 115200bps line speed communications
Low Power consumption mode and high-performance mode
TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server and Advanced UDP Operating modes.
Support for AT Commands
Support for a DNS Server allowing communications via a domain name.
Support for cross gateway and routing communications
Virtual Serial port access and an automatic re-connection after a network interruption
Flexible serial port data framing, allowing data packet segmentation.
Support for standard TCP / IP socket application access.
TCP Supports multiple-connections, which allow a maximum of 4 users to monitor or manage devices simultaneously.
Support for a Windows configuration tool, serial port, Web and other configuration forms.
Supports local and remote system firmware upgrades
|Ethernet||Standard: Ethernet port 10/100Mbps Base-T(Tx)|
|Protocol: TCP, UDP, ARP, HTTP, ICMP, DHCP, DNS|
|Rate: 10/100Mbps automatic flow control, MDI / MDI-X auto-adaptive interface on RJ45|
|Duplex Mode: full / half duplex mode self adapting|
|Operating Mode: 4 sessions, support for TCP Server, TCP Client, UDP, TCP Auto, Advanced TCP Server and Advanced UDP|
|Serial Port||Standards: EIA RS232-C, RS485, RS-422|
|RS-232 Signals: RxD, TxD, DTR, GND, DSR, RTS, CTS|
|RS-485 Signals: D+, D-, GND|
|RS-422 Signals: T+, T-, GND, R+, R-|
|Data rate: 300-115200bps|
|Parity bits: None, Even, Odd, Space, Mark|
|Stop Bit: 1 bit, 1.5bits, 2 Bits|
|Physical Interface: RS-232 dB9 male, RS-485 / 422 uses 5 pins 5.08mm pitch terminal blocks.|
|Directional Control: RS-485 direction of data flow is automatic|
|Load Capacity: RS-485 / 422 supports polling 32 points (customizable to 128 points) Pull high / low resistor for RS-485: 4.7 Ohm|
|Configuration Options||Web configuration, Serial port using AT Commands, Windows Configuration tool|
|Security||User permission levels|
|Indicators||Power Supply, Ethernet Port, Serial Port Indicator.|
|Power Supply||9-48vdc, 3 pins 5.08mm pitch terminal block. Support for reverse polarity protection|
|Power Consumption||No load 0.8w at 12 vdc. Fully Loaded 0.84w at 12 vdc.|
|Operating Temperature||-40c ~ +70c|
|Storage Temperature||-40C ~ +85C|
|Relative Humidity||5% ~95% (no condensation)|
|Physical Characteristics||Housing: IP 40
Dimensions 69mm(w) x 22mm(h) x 100mm(d)
|Industrial Standards||IEC 61000-4-2 (ESD)
Level 3 +/-8kV
Contact discharge +/- 6kV
|IEC 61000-4-4 (EFT/B ) Level 3
Power Supply +/- 2kv
Ethernet Interface: +/- 1kV
Serial Port:+/1 1Kv
|IEC 61000-4-5 (Surge) Level 2
Power Supply +/- 1kV, differential mode +/- 1kV
|Shock: IEC 60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC 60068-2-6
|Certification||CE, FCC, RoHS|
Case Communications 3611 Serial to Ethernet Converter
For more information please contact Case Communications