R2-16TxP-10S-G
26 Port Managed Industrial Gigabit Ethernet PoE Switch
Front Panel View
| 16×10/100/1000Mbps PoE/PoE+ Ports | 10 x Gigabit SFP Ports |
| 128 Gbps Switching Capacity | 40.32 M Packets Per Sec |
R2-16TxP-10S-G –
26 Port Layer 2+ Managed Industrial Gigabit Ethernet PoE Switch.
Rear Panel View
|
Power |
Performance |
|
AC100v ~ 240Vac |
40.32 Million Packets per second |
|
Maximum Consumption 300 Watts |
Backplane 128Gbps |
Key Features
- The R2-16TxP-10S-G 26 port Industrial Gigabit Ethernet Switch has a Combination of 16x 10/100/1000Mbps PoE Ethernet ports and 10 x 100/1000Mbps Gigabit SFP Ports
- Supports non-blocking wire speed performance
- Support for Full-duplex based on IEEE802.3x and half duplex back pressure
16 port Managed Industrial Ethernet Switch PoE Switch Overview
The Case Communications R2-16TxP-10S-G is a 26 port Layer 2+ fully managed Industrial Gigabit Ethernet PoE Switch
The R2-16TxP-10S-G has 10 x 1Gbps SFP Fibre slots and 16 x 10/100/1000 Base-T RJ45 Ports supporting PoE / PoE+ (802.3af / at) with a maximum switch power rating of 300 watts.
As a PoE Switch it can automatically detect and recognise any PoE equipment connected to the switch, such as terminal equipment, wireless access points, web cameras, VoIP phones, industrial sensors and a variety of other devices.
The 16 Port switch uses Layer 2+ network management and supports IPv4 / IPv6 management, static routes, full line-rate forwarding, a security protection mechanism, ACL / QoS Policies and rich VLAN functions.
The R2-16TxP-10S-G supports multiple network redundancy protocols such as STP / RSTP and MSTP and it also supports G.8032 (ERPS) allowing high levels of network resilience
Its possible to configure the switch to support multiple application services such as PoE Power Management, Port traffic control, VLAN Division via SNMP or through the Web Network Management GUI.
Intelligent PoE Power Supply
- 16 x 10/100/1000Base-T RJ45 ports supporting PoE / PoE+.
- IEEE 802.af /at as PoE Standards to ensure the switch wont damage ‘Non-PoE’ devices.
- Priority system for PoE ports, allowing the network manager to set priority to ports requiring power if the overall power budget is exceeded.
- IEEE802.1Q VLAN support, flexible VLAN division, Voice VLANS, and Q-in-Q support
- QoS Priority based on 802.1p port and DSCP, queue scheduling algorithm including EQU, SP, WRR & SP+WRR
- ACL (Access Control List) filter data packet through configuring matching rules, time permission windows, provides safe and flexible access control
- IGMP V1 / V2 and IGMP Snooping
- STP / RSTP . MSTP and ERPS network resilience
- Static and dynamic aggregation
Stability and reliability
- Low port power consumption, galvanised steel casing and active fan cooling
- High redundancy power supply, designed for long term and stable PoE supply to connected devices
- User friendly front panel displays the status of the Ethernet switch via LED’s
Easy Operation and maintenance
- Managed via web browser, CLI (Command Line Interface SNMP (V1 / V2 V3)
- HTTPS, SSLv3 and SSHV1 / V2
- Support for multiple network managers
- RMON, System log, LLDP and port traffic statistics
- CPU Monitoring, memory monitoring, Ping test and cable diagnostics.
R2-16TxP-10S-G Hardware Specifications
| Hardware Features | |
| Interfaces | 16 x 10/100/1000BaseT (IEEE 802.3af / at) PoE 10 x 100/1000Base-X SFP Ports RS 232 Console port. |
| PoE Standards | IEEE802.3af/at / bt |
| Ethernet Ports | 16 x 10/100/1000Base-T, Auto-Sensing, Full / Half duplex MDI / MDI-X Automatic adaption |
| Fibre Ports | 10 x Gigabit SFP Ports |
| Forwarding Mode | Store & Forward, full wire speed |
| Switching Capacity | 128 Gbps (Non-Blocking) |
| Forwarding rate | 40.32 Mpps |
| Mac Addresses | 8,000 Mac Addresses |
| Buffer memory | 4.1Mb Buffer memory |
| Jumbo Frames | 9.6K |
| PoE Pins | Default 1/2 (+), 3/6 (-) |
| Max Power per port | PoE+ = 30 watts |
| LEDS | Power: PWR System: SYS 1~16:Link LED 10/ 100M Link, 1000M=Gigabit Link 17-26: SFP LED |
| Reset Button | Reset to restore to factory defaults |
| Power Consumption | Standby<22w; Full Load <300W at |
| Heat Dissipation | Low noise: active fan cooling |
| Power Supply Input | Built in AC 100~240VAC, 50/60Hz |
| Operating Temperature | -40C ~ +55C 5% ~ 95% Non Condensing. |
| Dimensions | 440 x 290 x 45mm Boxed 515mm x 375mm x 95mm |
| Weight | Net<3.7Kg Gross< 4.5Kg |
| Installation | Desktop 19 inch rackmount |
| Protection Levels | Lightning Protection: 6Kv 8/20us Housing: IP30 IEC61000-4-2 (ESD) +/1 8Kv Contact discharge, +/1 Air discharge IEC61000-4-3 (RS): 10V / m (80-1000Mhz). IEC61000-4-4 (EFT): Power cable: +/- 4Kv; data cable: +/- 2Kv IEC61000-4-5-(Surge): Power cable: CM+/-4Kv / DM / +/- 2kV: data cable +/- 4Kv IEC61000-4-6 (Radio Frequency Transmission): 10 (150KHZ~ 80Mhz). IEC61000-4-8 (Power Frequency magnetic field): 100A/m, 1000A/m. 1S to 3S IEC61000-4-9: (Pulsed Magnetic Field) IEC61000-4-10 (damped oscillation): 30A/m 1MHz. IEC61000-4-12/18 (Shockwave): CM 2.5kV, DM 1kV. IEC61000-4-6 (Common-mode transmission): 30V: 300V, 1S FCC Part 15: CISPR22 (EN5022): Class A IEC61000-6-2 (Common Industrial Standard) |
| Mechanical properties | IEC60068 (anti-vibration) IEC60068-2-7 (anti-shock) IEC60068-2-32 (Free Fall) |
| Certification | CE Mark: CE / LVD EN60950 FCC Part 15, Class B R0HS |
R2-16TxP-10S-G Software Specifications
| Software Features | |
| Interface | IEEE802.3X(Full Duplex) Broadcast Storm Control based on port speed Bandwidth reduction on the ingress port, with a minimum packet rate of 64Kbps Port temperature protection setting. Green Ethernet port energy-setting |
| PoE Management | PoE Output power allocations, Off, 'af' and 'at' PoE priority configuration PoE working Status Power supply delay start Scheduling of PoE Operation and time |
| VLAN | 4K VLAN Port based VLANS. VLANS based on IEEE802.1q. MAC Based VLANS. Voice based VLANS. Q-in-Q configuration, Port configuration for Access, Trunk, Hybrid |
| Port Aggregation | LACP. Static aggregation, maximum of 13 groups and 8 port per group |
| Spanning Tree | STP (IEEE802.1d), RSTP (IEEE802.1w) MSTP (IEEE802.1s) |
| Industrial Ring | G.8032 (ERPS) Recovery time of less than 50ms, maximum ring size 1024 devices |
| Multicast | IGMP Snooping v1 / v2 / v3. Maximum 1024 Multicast groups, fast log out MLD Snooping v1 / v2 Multicast VLAN |
| Port Mirroring | Bi-Directional port data mirroring |
| Quality of Service | Diff-Serve QoS Priority Mark / Remark. 8 Output queues for each port 802.1p / DSCP Priority Mapping Queue Scheduling Algorithm (SP, WRR, SP+WRR) Flow-based packet filtering, Flow based redirection Flow based limiting. |
| ACL ( Access Control Lists) | L2 to L4 packet filtering, matching first 80 bytes of the message. ACL based on; MAC Address Destination MAC Address. IP Source Address Destination IP Address. IP Protocol Type TCP / UDP Port TCP/UDP Port range. VLAN Port based issuing ACL. ACL based on ports and VLANs. |
| Security | User hiearchical management and password protection. SSH 2.0, SSL Port isolation ARP message speed limit Broadcast storm control. Backup for host datum IEEE802.1X MAC Address authentication. MAC Black holes IP Source protection AAA & RADIUS Server support. MAC Learning limit ARP Inspection Anti-DOS Attack IP-MAC-VLAN- Port Binding. |
| DHCP | DHCP Client DHCP Snooping DHCP Server. DHCP Relay |
| Management | Console / AUX Modem / Telnet / SSH2.0 CLI Management. Web Management (HTTPS) Download and upload via FTP TFTP - Modem, SFTP. SNMP v1 / V2c / V3 One key recovery NTP (Network Timing Protocol). System Log Ping Test Cable Test CPU Utilisation view LLDP + SNMP |
| Quality of Service | Diff-Serv QoS Priority Marking / Remarking 8 Output queues for each port 802.1p DSCP Priority mapping Queue Scheduling Algogirthm (SP, WRR,SP+WRR) Flow-based packet filtering Flow-based redirection. Flow-based rate limiting. |
| DHCP | DHCP Snooping, DHCP Server, DHCP Relay |
| Management and Maintenance | Console / Aux / Modem / Telnet / SSH 2.0 CLI Command Line |
R2-16TxP-10S-G Ordering Information
| Feature | Description |
| R2-16TxP-10S-G | Rackmount Industrial 28 port managed Layer 2+ Gigabit PoE Switch |
Product Downloads
Configuring ERPS on Case G Series Switches (1777 downloads ) How to configure ERPS Ring Protection on Case Communications Industrial Ethernet Switches
Data Sheet R2 16TxP 10S G (809 downloads )
For more information please contact Case Communications.