Point to point and point to multi-point wireless overview
The 450i Point to point and point to multi-point wireless system from Case Communications is a very well field proven family of products designed for various applications including fixed wireless access infrastructure for operator and enterprise networks as well as select nomadic and mobile scenarios.
Applications
- Triple-play wireless ISP networks
- Video surveillance, traffic management and public safety wireless infrastructure
- Fixed, nomadic and mobile connectivity solution for SCADA systems
- Long-range rural connectivity
- Government and municipal network
Case Communications Point to point and point to multi-point wireless key features and highlights
- 300 Mbps Maximum Base Station sector capacity
- Ultra-Wide band Radios 3Ghz or 5Ghz
- 2 x 2 OFDM MIMO Radio Capable of up to 300Mbps per sector
- Advanced radios design improves transmit power and increases receiver sensitivity
- Rugged Metal Enclosure – designed to meet IP-66 and IP-67 standards and to withstand harsh environments.
- Optional ATEX / HAZLOC certified models
- Dynamic Interference Filtering for improved performance
- Flexible frequency planning and powerful interference mitigation tools
- Advanced Quality of Service Tools.
Security
- Encryption: FIPS-197 128bit AES, 256-Bit AES (Requires Optional Licence)
Best-in-breed solution for long-range rural connectivity
- High gain integrated base station sectors and subscriber terminals boost sector coverage up to 40 miles, 64 km
- All-integrated solution in combination with installation and field diagnostics tools available facilitate rapid deployment and reduce installation costs
- Robust and durable design featuring IP66 / IP67 water and dust protection as well as built-in lightning protection help reducing total cost of ownership (TCO) and meet service level agreement (SLA) requirements of the most demanding customers
Network Management
- Multiple management interfaces including IPv4 / IPv6 (dual Stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and SNMP3
- The 2×2 systems can easily be integrated into a 3rd party NMS such as CaseView
| Spectrum | ||
|---|---|---|
| Channel Spacing | 3Ghz; Customisable to 50Khz | 5Ghz Configurable in 2.5Mhz Increments |
| Frequency | 3Ghz: 3300 - 3900Mhz | 5Ghz: 4900 - 5925Mhz |
| Channel Width | 5Mhz, 7Mhz, 10Mhz, 15Mhz, 20Mhz, 30Mhz, or 40Mhz | 5Mhz, 10Mhz, 15Mhz, 20Mhz, 30Mhz or 40Mhz |
| Interface Specifications | |
|---|---|
| Physical Layer | 2 x 2 MIMO OFDM |
| Ethernet Interface | 100 / 1000Base-T, full duplex, rate auto negotiated (802.3 compliant) |
| Protocols Used | IPv4, IPv6, UDP, TCP/IP, ICMP, Telnet, SNMP, HTTP, HTTPS,FTP |
| Network Management | IPv4 / IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and V3 |
| MTU | 1700 bytes |
| VLAN | 802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority, dynamic port VID |
| Performance | ||
|---|---|---|
| Modulation Levels (Adaptive) | MCA | Signal to Noise required (SNR in dB) |
| 2x | QPSK | 10 |
| 4x | 16QAM | 17 |
| 6x | 64QAM | 24 |
| 8x | 256QAM | 32 |
| Maximum Deployment range | Up to 200 Kilometres (124 miles) depending on configuration | |
| Latency | 3 ~ 5ms typical | |
| GPS Synchronisation | Yes via Autosync (UGPS, CMM4 or CMM5) | |
| Quality of Service | Diffserve QoS | |
| Physical Features | |
|---|---|
| Antenna Connection | 50Ohm, N-Type (Connectorised version only) |
| Surge Suppression (LPU Fitted) | EN61000-4-5: 12us/50us, 500V voltage waveform. Recommend external surge suppressor. |
| Mean Time Between Failure | >40 years |
| Dust and Water | IP67, IP66 |
| Temperature / Humidity | -40C to +75C (-40F to 167F) 0-100% condensing |
| Weight | Approx. 2.5Kg (5.5lbs) |
| Wind Survival | 322 Km/h (200mph) |
| Vibration | NEMA TS2 Section 2.1.9 and Section 2.2.3 |
| Shock | NEMA TS2 Section 2.1.10 and Section 2.2.4 |
| External Icing | NEMA 250-2003 Section 5.6 |
| Dimensions (H x W x D) | 31.0 x 31.0 x 6.4cm (12" x 12" x 2.5") |
| Power Consumption | 15W Typical, 18W max. |
| Input Voltage | 48~59vdc, 802.3at compliant |
| Installation | Wall or Pole Mount |
| Link Budget | |
|---|---|
| Antenna Beam Width | 10 degree azimuth for integrated antenna |
| Antenna Gain | 3Ghz integrated +19dBi dual pol, H+V |
| Transmit Power Range | 40dB dynamic range (EIRP limit by region( (1dB steps) |
| Maximum Transmit Power | +27dBm combined output (+25dBm combined for 3Ghz) |
| VSWR | 1.5 Reflection Coefficient 0.2. Reflected Power 4%, return Loss 14dB |
| Power Control | ATPC (Automatic Transmit Power Control) at system level, Backhaul slave implements ATPC (Future software release) |
450i Datasheet (731 downloads )
Please Contact Case Communications for 450i Point to point and point to multi-point wireless ordering Information
For more information please contact Case Communications.